Bachelor of Engineering (Honours) (Electrical and Mechatronic) (Pathway to Master of Engineering (Engineering Management))
Degree Level Undergraduate
Year 2024
You're viewing degree information for Australian students
You're considered an Australian student if you are any of the following:
- Australian or New Zealand Citizen
- Australian Permanent Resident (including Permanent Humanitarian Visa holders)
Entry Scores
2024 Guaranteed Entry
View Guaranteed Entry Info
2023 Cut-Offs
View full entry requirements
-
View full entry requirements Hide full entry requirements
Entry requirements
Admission criteria
The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.
Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.
Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:
Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND- Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
- Complete secondary qualifications equivalent to SACE, or
- Complete the International Baccalaureate Diploma with a minimum score of 24 points
Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.
OR
Higher education study- Complete or partly complete a recognised higher education program at a recognised higher education institution, or
- Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above, or
- Complete the Associate Degree in Engineering at the University of South Australia
OR
Vocational Education and Training (VET)- Complete an award from a registered training organisation at Certificate IV or above
OR
Work and life experience- Qualify for Special Entry, or
- Complete a 12-month UniSA Foundation Studies program or equivalent, or
- Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past
Essential requirements for admission
Prerequisites
SACE Stage 2 Math MethodsAssumed Knowledge
SACE Stage 2 Physics
Students can apply for this program using the Application to Change Program form after successfully completing one semester of study at UniSA.
Degree overview
- Fast-track your career and complete a master degree in just one year instead of two.
- Position yourself at the forefront of technology where mechanical and electrical engineering and computer science combine.
- Extend your skills into the specialised field of engineering management focusing on operation management, resource planning, supply chain and project management.
- Benefit from a program of study that is informed by our well above world-class research in engineering¹.
- Study at SA’s No. 1 university for graduate skills in engineering².
- Gain real-world experience through the UniSA STEM Professional Practice Program involving 450+ hours of placements, internships, site visits and networking events.
- Complete a thesis or research project in your area of interest with opportunities to work on an industry-related project.
- Professionally accredited by Engineers Australia (EA)³, graduates are eligible for membership with EA and comparable international institutions.
¹2018 Excellence in Research for Australia (ERA)
²ComparED (QILT) Student Experience Survey 2020-21, Skills Development Indicator (Undergraduate and Postgraduate). SA public universities.
³Bachelor of Engineering (Honours) (Electrical and Electronic)
Snapshot
This fast-tracked program of study offers an accelerated pathway to a master level qualification that provides you with an advanced level of knowledge in the specialised field of engineering management.
Electrical and mechatronic engineers are good problem solvers with a passion for science, mathematics and technologies, as well as the application of that knowledge to bettering quality of lives.
This exiting discipline focuses on the synergistic application of electrical, mechanical, control and software technologies to the development of electromechanical systems using a holistic, integrated design approach. In this degree you will explore the physics-based modelling and simulation of electromechanical systems and learn how to analyse, design and implement electromechanical systems using cutting-edge software platforms and collaborative digital environments.
As an electrical engineering student, you will have access to industry standard facilities, with UniSA ranked No.1 in SA for engineering facilities¹. Facilities include the newly refurbished Power System Laboratory, Digital Electronics Laboratory, Electronics Innovation Laboratory and the Mechatronics Laboratory.
By combining your undergraduate studies in electrical and electronic engineering, with a Master of Engineering (Engineering Management) you will further develop your skills to include managing the operations of an engineering organisation.
Our connections with industry will see you gain at least 450 hours of skills and competencies through the UniSA STEM Professional Practice Program, including placements, internships, guest lectures, industry panels, site visits and networking events. Hear more about the benefits of the UniSA Industry experience from graduates William, Franke and Teresa here.
¹ComparED (QILT) Student Experience Survey 2020-21, Learning Resources Indicator (Postgraduate). SA public universities.
What you'll learn
Your undergraduate degree will start with building a strong foundation in engineering, including computer programming, applied mathematics and physics. As yours studies progress, you will learn about:
- analog and digital electronics
- mechanics
- electromechanical system design
- computer networking and programming
- embedded systems
- signal processing
- industrial actuation and automation
- mobile robotics
- machine learning and vision
- systems engineering
- project management
A significant portion of your honours year will then involve a major project supported by industry clients, or based in a research centre such as the Sustainable Infrastructure and Resource Management concentration.
Progressing through to your postgraduate studies you will learn about the strategic management of engineering operations as they relate to managing an engineering organisation. You can study topics such as:
- robotics and automation
- energy management
- organisational leadership
- enterprise resource planning
- project planning and control
- strategic procurement
The UniSA STEM Professional Practice Program will allow you to apply the skills and knowledge attained throughout your studies in real-world settings.
You can gain an extra qualification and broaden your career prospects by completing a Diploma in Languages.
Study hours
For each course you study, you will need to allocate time for various classes such as lectures, tutorials, workshops, seminars and practicals. Plus you will need additional hours to study in your own time to complete assignments, readings and projects, as well as to contribute to online discussion forums (independent study). So as a general rule, if you are studying full-time you would need to allocate 12–26 hours of study when at university and 14–28 hours of independent study per week.
Global opportunities
Enrich your studies and your life – make overseas study part of your qualification. You may have the option to undertake an exchange, short-term program or study tour overseas while you study. We have links with universities worldwide, as well as a range of travel grants available to make going overseas much more accessible.
You can choose short-term or semester-long study from a range of universities and countries depending on your area of study and cultural interests.
Take a look at the global opportunities available.
Honours
This is a four-year, professional degree with honours. The honours component includes a minimum of one year of advanced studies in research and professional practice. You will receive First Class, Second Class or Third Class Honours, depending on your performance.
You will graduate with industry experience and connections, and a higher-level qualification than a bachelor degree. Your honours year is designed to prepare you for future leadership roles in electrical engineering.
Why Bachelor of Engineering (Honours) (Electrical and Mechatronic) (Pathway to Master of Engineering (Engineering Management))
This fast-track to Masters program enables you to commence a Bachelor of Engineering (Honours) (Electrical and Mechatronic) and secure a place in the Master of Engineering (Engineering Management) to be completed in five years of study instead of the typical six years, with the program granting you one year of advanced standing.
Professionally accredited by Engineers Australia, your undergraduate degree will equip you with practical skills and theoretical understanding in topics such as analogue and digital electronics, mechanics, electromechanical system design, computer programming and networking, embedded systems, industrial actuation and automation and machine learning and vision.
You will have access to industry standard facilities and enjoy significant opportunities to apply your knowledge and skills through the 450+ hours of the UniSA STEM Professional Practice Program.
Progression to the master degree will see your learning supported by world-class engineering research, with UniSA rated well above world-class for research in engineering¹, and strong theoretical teaching integrated with experienced-based learning. The program provides engineering management skills for future leaders in the industrial engineering sectors, equipping you with the skills and knowledge needed to strive in the ever-competitive global market.
12018 Excellence in Research for Australia (ERA)
Your career
To be a successful electrical and electronic engineer, you should be a good problem solver, show a passion for understanding science, mathematics and technologies, and applying your knowledge to the betterment of the quality of lives. You could consider pursing a career as an electrical design engineer, electronics engineer, computer / embedded system engineer, power system engineer, telecommunications engineer, control system engineer, systems engineer, engineering consultant or as an entrepreneur using initiative, commercial acumen and broad ranging business skills to develop or transform a product or service.
With the combination of the Bachelor and Masters program there are additional career options, with employment opportunities in engineering consulting firms, construction companies, and local, state and federal government. You could consider:
- energy manager: monitoring and reducing energy usage; understanding where and how energy is used; highlight energy reduction across business, projects and work sites
- engineering operations manager: supervising and leading teams of engineers, scientists and technicians who work on projects; overseeing production and quality control; directing operations, testing and maintenance; planning and scheduling, client consulting, budgetary responsibilities
- quality assurance manager: working with management and staff to establish procedures and quality standards and to monitor these against agreed targets; writing management and technical reports; determining training needs; promoting change and improvement in performance and quality
- business development engineer: developing and maintain excellent client relationships; working with new and existing clients to create new business and identify new markets; proposing business ventures, providing project details, writing business proposals, meeting business revenue targets
You could also continue with a PhD through one of our dynamic research concentrations.
Industry facts
Scholarships
Every year, over 2,500 UniSA students are supported in their studies through scholarships and grants worth millions of dollars. Check out the scholarships below. One of them may be perfect for you. Visit our scholarships page for more.
UniSA Excellence Scholarships
$5,000 scholarship for South Australian students with an ATAR of 99 who enrol to study a UniSA undergraduate degree.
UniSA Outstanding Achievement Scholarship
Up to $10,000 per annum (full time) for South Australian students who obtain an ATAR of 99.95 or IB equivalent and enrol to study at UniSA.
Study on Demand with Australia's University of Enterprise
UniSA Online – 100% online degrees designed specifically for online learning.
Your study experience and support
Our campuses are home to fantastic facilities including modern lecture theatres, libraries, workshops and laboratories, as well as spaces that simulate real work environments. But you’ll also discover that your journey at UniSA is about social experiences, healthy living and getting involved. You’ll find student sports and fitness facilities, community clinics, tech zones and chill-out spaces. There are campus sport activities to keep you active, and if you are keen to explore the social side of university life, there are movies, cooking demonstrations, parties and loads more.
Adelaide also has a variety of accommodation options to suit different requirements and budgets. Options include dedicated student accommodation and private rentals. See our long-term accommodation pages, or explore our student accommodation by Scape on Bank Street in Adelaide’s lively cultural precinct, an ideal location for students. It is within easy reach of UniSA’s city and metropolitan campuses, Rundle Mall shopping, the Central Market, Chinatown, and the West End’s vibrant nightlife. It is also across the road from the Adelaide train station, and on bus and tram routes.
Student services
Our student services provide you with all the support you need at university. We want you to succeed, and if you need help, we're here to assist. You can access a full range of support services, including:
- academic counselling
- personal counselling
- social support services, including family support and nearby childcare
- common rooms
- prayer rooms
- security officers
- career services and mentoring
- Wirringka Student Services, offering Aboriginal and Torres Strait Islander students a supportive place to study
- as well as services offered through our student association, USASA.
When you become a UniSA student, you can also contact Campus Central for help with anything related to your degree. They will help you with your enrolment, ID cards, fees, timetables and more.
24/7 digital environment
Our learnonline facilities include a personal learning environment with virtual classrooms, lecture recordings, emails, learning support, administration, library access and results. The environment is available 24 hours a day, seven days a week, so you can tailor your learning to your life. We are continually investing in innovative digital technologies for a high-quality student learning experience.
Your program director
Dr Habibullah is a Lecturer in Mechatronics Engineering at the UniSA STEM, Mawson Lakes Campus. Previously, he worked as a lecturer in Mechatronics Engineering with the School of Environment, Science and Engineering (SESE), Southern Cross University (SCU), Australia. Followed by an FNRS Scientific Collaborator with the BEAMS Department, Universite Libre de Bruxelles (ULB), Belgium, Research Associate, and Casual Academic positions at the University of New South Wales (UNSW), Canberra at the Australian Defence Force Academy.
Dr Habibullah received a BSc degree in Mechanical Engineering with First Class Honours 1st from the Rajshahi University of Engineering and Technology (RUET), Bangladesh. He has been awarded the University Gold Medal for his excellent performance during his undergraduate study. He has completed ME and PhD degrees in Mechatronics Engineering from the University of New South Wales (UNSW), Australia. He is a member of the Asian Control Association (ACA), the International Federation of Automatic Control (IFAC), and an Ex. member of the LIGO Scientific Collaboration (LSC).
His research interests are in the joint areas of control theory and application, mechatronics, bio-mechatronics, robotics, industrial automation, nanotechnology, low-frequency vibration isolation, and vibration control of mechanical structures.
-
How do I apply?
There are a number of ways to apply to study UniSA's undergraduate and postgraduate coursework degrees.
Applications for admission into the University of South Australia’s undergraduate and most postgraduate degrees are made via the South Australian Tertiary Admissions Centre (SATAC). Visit satac.edu.au and follow the links.
For the MBA degrees please apply through the UniSA MBA Application Portal. Applications for a small number of degrees are submitted direct to UniSA through our Apply Online portal. It will be noted on the degree page if you need to apply via Apply Online.
Postgraduate study by research
For information on applying to do postgraduate study by research, including Master of Research, PhDs or Doctorates, please visit unisa.edu.au/resdegrees. -
Is there a closing date for applications?
Undergraduate
Yes. The deadline to apply to study a degree at UniSA for semester one (commencing late February) and be given equal consideration is in early December. While you may be able to apply after this date, you are not guaranteed to be considered equally with other applicants and your application may not be assessed in time for the main round of offers (mid January). Some degrees will not make any offers after the main offer round. Please click here find all of the key dates for applications here.Postgraduate
Most postgraduate degrees do not have a closing date for applications. However, there are exceptions, so it is best to check – either on the SATAC website, Apply Online or the degree homepage. Postgraduate offers are normally ‘rolling’, meaning they may be sent out at any time up until the program starts. This also means that applications may close at any time without warning, if the quota is filled earlier. For this reason, postgraduate applications should be submitted without delay. For more information, please contact our Future Student Enquiries team on (08) 8302 2376 or via the online enquiry form. -
What credit can I receive for previous studies?
Credit transfer or advanced standing
You may be eligible to receive a credit transfer or advanced standing for your chosen UniSA degree based on your previous studies, if they are in a related area at an equivalent or higher level. Receiving a credit transfer will reduce the number of courses you undertake within the degree, and may also reduce the overall duration of your degree.
Recognised prior learning
If you have related industry experience, you may also be eligible to receive recognised prior learning for this experience. Receiving recognised prior learning will normally reduce the number of courses you undertake within the degree, and can reduce the duration of the degree.
How do I get credit?
Credit transfer and recognition of prior learning is assessed on a case-by-case basis by the Program Director who will discuss your prior learning and experience with you to ascertain what credit you may be eligible for.
Many of our credit transfer arrangements are listed on our online Credit Assessor.
-
Can I speak to someone regarding my study options?
UniSA welcomes the opportunity to speak with you regarding your study options. Our staff are able to talk to you about degree information, career outcomes and pathways, entry requirements, applications, and student life, so that you are able to make the best study decision for your future.
Click here to book a 1:1 appointment with one of our enquiries team.
If you are interested in studying an MBA please contact admissions@unisa.edu.au and our Future Student Enquiries team will contact you regarding your enquiry.
Alternatively, you can complete a MyCareerMatch career profile. MyCareerMatch is an online career profiling tool that you can use free-of-charge through UniSA. MyCareerMatch specialises in career profiles and provides you with a personalised career report outlining information about your personality style and a list of career options, which are complementary to your natural strengths and talents.
We have many events throughout the year where you can speak with a lecturer or tutor about your degrees of interest. You can find out what is happening at UniSA by visiting our events page or by signing up to our mailing list, so you're the first to know about careers events, information sessions, degree requirements, scholarships and more!
There are also many career counsellors external to the University that you can discuss your career options with. If you are unsure where to start your search, you can contact the Government's Work Ready team (formally Skills for All). Visit skills.sa.gov.au or call 1800 506 266.
You may also find Job Outlook a helpful resource in your decision-making.
-
Where can I get further information?
It can be difficult to decide what degree you would like to do and where. You might find information from government organisations will help to weigh up your degree and provider options.
Find a course or a provider
TEQSA is a regulatory body for higher education providers. Use the TEQSA national register of higher education providers to search for a course or a provider. Compare courses and providers for undergraduates and postgraduates using the Quality Indicators for Learning and Teaching (QILT) online comparison tool.
More information on university admission
Visit the SATAC website to find out important news, events and information on applying to university in South Australia. Visit Study with Us to find out everything you need to know about studying at UniSA, admissions and the application process.
Questions about your application
If you have any questions or concerns regarding your application you should contact the Future Students Enquiries team in the first instance.
