Bachelor of Engineering (Honours) (Electrical and Mechatronic) (Pathway to Master of Engineering (Engineering Management))
Undergraduate
2025
You're considered an International student if you are:
Undergraduate
2025
The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.
Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.
Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:
Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND
Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.
OR
Higher education study
OR
Vocational Education and Training (VET)
OR
Work and life experience
Vietnam | 7.5 |
Australia | 72 |
IB (best 6) | 26 |
USA SAT (1600) | 1110 |
India (best 4) State Board | 75 |
Canada High School (OSSD) | 65 |
Eynesbury FSP | 330 |
India (best 4) Central Board | 65 |
German Abitur | 3.5 |
HKDSE | 15 |
Kenya KCSE (average) | B+ |
Nepal NEB | 2.61 |
Bangladesh HSC | 4 |
Malaysia STPM (best 3) | 6 |
Malaysia UEC | 30 |
Norway GPA | 3 |
Pakistan HSSC | 85 |
Sri Lanka A Levels (best 3) | 7 |
Sweden GPA | 13 |
UK Board GCE A Levels/HK Board | 7 |
Students can apply for this program using the Application to Change Program form after successfully completing one semester of study at UniSA.
This fast-tracked program of study offers an accelerated pathway to a master level qualification that provides you with an advanced level of knowledge in the specialised field of engineering management.
Electrical and mechatronic engineers are good problem solvers with a passion for science, mathematics and technologies, as well as the application of that knowledge to bettering quality of lives.
This exiting discipline focuses on the synergistic application of electrical, mechanical, control and software technologies to the development of electromechanical systems using a holistic, integrated design approach. In this degree you will explore the physics-based modelling and simulation of electromechanical systems and learn how to analyse, design and implement electromechanical systems using cutting-edge software platforms and collaborative digital environments.
As an electrical engineering student, you will have access to industry standard facilities, with UniSA ranked No.1 in SA for engineering facilities¹. Facilities include the newly refurbished Power System Laboratory, Digital Electronics Laboratory, Electronics Innovation Laboratory and the Mechatronics Laboratory.
By combining your undergraduate studies in electrical and electronic engineering, with a Master of Engineering (Engineering Management) you will further develop your skills to include managing the operations of an engineering organisation.
Our connections with industry will see you gain at least 450 hours of skills and competencies through the UniSA STEM Professional Practice Program, including placements, internships, guest lectures, industry panels, site visits and networking events. Hear more about the benefits of the UniSA Industry experience from graduates William, Franke and Teresa here.
¹ComparED (QILT) Student Experience Survey 2020-21, Learning Resources Indicator (Postgraduate). SA public universities.
Your undergraduate degree will start with building a strong foundation in engineering, including computer programming, applied mathematics and physics. As yours studies progress, you will learn about:
A significant portion of your honours year will then involve a major project supported by industry clients, or based in a research centre such as the Sustainable Infrastructure and Resource Management concentration.
Progressing through to your postgraduate studies you will learn about the strategic management of engineering operations as they relate to managing an engineering organisation. You can study topics such as:
The UniSA STEM Professional Practice Program will allow you to apply the skills and knowledge attained throughout your studies in real-world settings.
This fast-track to Masters program enables you to commence a Bachelor of Engineering (Honours) (Electrical and Mechatronic) and secure a place in the Master of Engineering (Engineering Management) to be completed in five years of study instead of the typical six years, with the program granting you one year of advanced standing.
Professionally accredited by Engineers Australia, your undergraduate degree will equip you with practical skills and theoretical understanding in topics such as analogue and digital electronics, mechanics, electromechanical system design, computer programming and networking, embedded systems, industrial actuation and automation and machine learning and vision.
You will have access to industry standard facilities and enjoy significant opportunities to apply your knowledge and skills through the 450+ hours of the UniSA STEM Professional Practice Program.
Progression to the master degree will see your learning supported by world-class engineering research, with UniSA rated well above world-class for research in engineering¹, and strong theoretical teaching integrated with experienced-based learning. The program provides engineering management skills for future leaders in the industrial engineering sectors, equipping you with the skills and knowledge needed to strive in the ever-competitive global market.
12018 Excellence in Research for Australia (ERA)
To be a successful electrical and electronic engineer, you should be a good problem solver, show a passion for understanding science, mathematics and technologies, and applying your knowledge to the betterment of the quality of lives. You could consider pursing a career as an electrical design engineer, electronics engineer, computer / embedded system engineer, power system engineer, telecommunications engineer, control system engineer, systems engineer, engineering consultant or as an entrepreneur using initiative, commercial acumen and broad ranging business skills to develop or transform a product or service.
With the combination of the Bachelor and Masters program there are additional career options, with employment opportunities in engineering consulting firms, construction companies, and local, state and federal government. You could consider:
You could also continue with a PhD through one of our dynamic research concentrations.
How to apply for international students will give you helpful information about the application process at the University of South Australia. When you are ready, apply through our International Application System. If you would like to talk to someone near you about studying at the University of South Australia, we have agents all over the world who can assist you. Find an Education Agent in your country.
Every year, over 2,500 UniSA students are supported in their studies through scholarships and grants worth millions of dollars. Check out the scholarships below. One of them may be perfect for you. Visit our scholarships page for more.
Recipients can get a 50% reduction on tuition fees for up to four years of full-time study for selected degrees.
Recipients can get a 15% reduction on tuition fees for the duration of their chosen degree.
As a UniSA student, you will have unique access to work placement opportunities, overseas study tours and exchanges, networking events, internships, guest speakers and more.
Our campuses are equipped with state-of-the-art facilities including modern lecture theatres, libraries, workshops and laboratories, as well as spaces that simulate real work environments. These are all supported by the latest technologies and a 24/7 online learning platform. We have health services on campus, gymnasiums, technology zones and great student lounges. You will also gain access to a range of community clinics, which provide professional and cost effective services in areas of health, business, law and psychology. There are campus sport activities to keep you active, and if you are keen to explore the social side of university life, there are movies, cooking demonstrations, parties and lots more.
Adelaide also has a variety of accommodation options to suit different requirements and budgets. Options include dedicated student accommodation and private rentals. See our long-term accommodation pages, or explore our student accommodation by Scape on Bank Street in Adelaide’s lively cultural precinct, an ideal location for students. It is within easy reach of UniSA’s city and metropolitan campuses, Rundle Mall shopping, the Central Market, Chinatown, and the West End’s vibrant nightlife. It is also across the road from the Adelaide train station, and on bus and tram routes.
Dr Habibullah is a Lecturer in Mechatronics Engineering at the UniSA STEM, Mawson Lakes Campus. Previously, he worked as a lecturer in Mechatronics Engineering with the School of Environment, Science and Engineering (SESE), Southern Cross University (SCU), Australia. Followed by an FNRS Scientific Collaborator with the BEAMS Department, Universite Libre de Bruxelles (ULB), Belgium, Research Associate, and Casual Academic positions at the University of New South Wales (UNSW), Canberra at the Australian Defence Force Academy.
Dr Habibullah received a BSc degree in Mechanical Engineering with First Class Honours 1st from the Rajshahi University of Engineering and Technology (RUET), Bangladesh. He has been awarded the University Gold Medal for his excellent performance during his undergraduate study. He has completed ME and PhD degrees in Mechatronics Engineering from the University of New South Wales (UNSW), Australia. He is a member of the Asian Control Association (ACA), the International Federation of Automatic Control (IFAC), and an Ex. member of the LIGO Scientific Collaboration (LSC).
His research interests are in the joint areas of control theory and application, mechatronics, bio-mechatronics, robotics, industrial automation, nanotechnology, low-frequency vibration isolation, and vibration control of mechanical structures.
There are a number of ways to apply to study UniSA's undergraduate and postgraduate coursework degrees.
You can access our online International Application System through our How to Apply page. The International Application System is an easy and secure online application and acceptance process. You will have visibility of your application through the secure online portal with the ability to download offer documents, submit your acceptance and make a payment.
Alternatively you can submit an application through one of the University's registered Education Agents.
If you are completing an Australian year 12 qualification in Australia or overseas, or the International Baccalaureate (IB) Diploma Programme in Australia, you must apply through SATAC http://www.satac.edu.au/.
If you are applying for the UniSA Study Abroad or Study Abroad Plus program, you can submit your application online here.
Postgraduate study by research
For information on applying to do postgraduate study by research, including Masters by Research, PhDs or Doctorates, please visit http://unisa.edu.au/resdegrees.
There is no closing date for submitting your application however the admissions process takes between one and three weeks from the date that we receive your application and all required supporting documentation.
If you are completing an Australian year 12 qualification in Australia or overseas, or the International Baccalaureate (IB) Diploma Programme in Australia, you must apply through SATAC. Key dates for applications can be found here.
You may be eligible to receive credit or advanced standing for your chosen UniSA degree based on your previous studies, if they are in a related area at an equivalent or higher level. Receiving credit will reduce the number of courses you undertake within the degree, and may also reduce the overall duration of your degree.
The amount of credit you may be eligible to receive is assessed on a case-by-case basis by the Admissions team.
The best way to determine your eligibility to receive credit or advanced standing is to apply using our International Application System which can be found on our How to Apply page. You will need to supply detailed syllabus documents with your application.
UniSA welcomes the opportunity to speak with you regarding your study options. Our staff are able to talk to you about degree information, career outcomes and pathways, entry requirements, applications, and student life, so that you are able to make the best study decision for your future.
Click here to book a 1:1 appointment with one of our enquiries team.
We also have many events throughout the year in Australia and overseas where you can speak with UniSA representatives about your area of interest. View our calendar of events in your home country by selecting the 'International' filter.