You're viewing degree information for International students

You're considered an International student if you are:

NOT an Australian or New Zealand citizen
NOT an Australian Permanent Resident (including Humanitarian Visa holders)

Not an International student? Switch to Australian content

Bachelor of Engineering (Honours) (Civil and Structural)

Degree Level Undergraduate

Years

International students

Start date
February
July

Campus
Mawson Lakes

Duration
4 year(s) full-time

Mode
On-campus

Program Code
LHMI

Prerequisites
SACE Stage 2 Math Methods
More info

Assumed Knowledge
SACE Stage 2 Physics
More info

Fees
AUD$ 35,900 per annum (per 1.0 EFTSL) for students enrolled in 2020

English Language Requirements

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Equivalent English qualifications (PDF)

International Admission by Country
See full entry requirements

CRICOS Code
081807A

Entry requirements

Admission criteria

The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.

Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.

Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:

Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND

Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
Complete secondary qualifications equivalent to SACE, or
Complete the International Baccalaureate Diploma with a minimum score of 24 points

Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.

OR
Higher education study

Complete or partly complete a recognised higher education program at a recognised higher education institution, or
Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above, or
Complete the Associate Degree in Engineering at the University of South Australia

OR
Vocational Education and Training (VET)

Complete an award from a registered training organisation at Certificate IV or above

OR
Work and life experience

Qualify for Special Entry, or
Complete a UniSA Foundation Studies program or equivalent, or
Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past

Essential requirements for admission

Prerequisites

SACE Stage 2 Math Methods

Assumed Knowledge

SACE Stage 2 Physics

English language entry requirements

In addition, international students of non-English speaking backgrounds must have obtained one of the following standards within the last two years prior to admission. Possession of one or more of these qualifications, in addition to the academic entry requirements, does not, in itself, guarantee a place at the University of South Australia. Applications are considered on an individual basis and selection is competitive. Where previous study/work experience was conducted in English, the application must be accompanied by certified documentation from the educational institution/employer certifying that the language of instruction/employment was English.

English language test

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Please access the following link for a comprehensive list of English language tests accepted by UniSA and other important information in relation to meeting the University’s language requirements: English Language Equivalence Table (PDF)

Admission Requirements by Country

German Abitur	2.3
India (best 4)	65
Kenya KCSE (average)	B+
Malaysia STPM (best 3)	7
Malaysia UEC	28
Norway GPA	3.9
Pakistan HSSC	85
Sri Lanka A Levels (best 3)	7
Sweden GPA	14
UK Board GCE A Levels/HK Board	7
Vietnam	8.5
Australia	75
IB (best 6)	27
USA SAT (1600)	1270
HKDSE	17
Nepal NEB	2.71
Bangladesh HSC	4
Canada High School (OSSD)	70
Eynesbury FSP	350

View full entry requirements Hide full entry requirements

Aim

The Bachelor of Engineering (Honours) (Civil and Structural) uses an industry focused, project-based teaching and learning approach to develop professional structural engineers who are well prepared to work in diverse, interdisciplinary teams to solve complex problems in a socially and culturally appropriate manner.

Content & Structure

The program consists of a common first year across all Engineering disciplines. The first two years of the program provide an introduction to the main areas available in civil engineering, a broad base in engineering, science, and maths, as well as other skills such as design, problem solving, team work and communication that are essential for professional practice as an engineer. In third year students focus in detail on structural, water and geotechnical engineering - and their interaction with the environment. Third year continues the professional practice development through a focus on business management knowledge required by engineers. Half of fourth year is devoted to major projects, both design and research, with the remainder being specialist courses and one civil engineering elective. Industry internship options are also available.

What courses you'll study

Course name	Area and cat no.	Units	Reference
FIRST YEAR
First Semester (Study Period 1, 2 or 3)
Programming Concepts	COMP 1045	4.5
Engineering Materials	RENG 1005	4.5
Mathematical Methods for Engineers 1	MATH 1063	4.5
Sustainable Engineering Practice	ENGG 1003	4.5
Second Semester (Study Period 4, 5 or 6)
Mathematical Methods for Engineers 2	MATH 1064	4.5
Electrical and Electronic Systems	EEET 1027	4.5
Engineering Mechanics	MENG 1012	4.5
Engineering Design and Innovation	ENGG 1004	4.5
SECOND YEAR
First Semester (Study Period 1, 2 or 3)
Engineering Modelling	MATH 2009	4.5
Mechanics of Materials	CIVE 2005	4.5
Introduction to Surveying and Spatial Sciences	GEOE 1018	4.5
Engineering and Environmental Geology	EART 3012	4.5
Second Semester (Study Period 4, 5 or 6)
Introduction to Water Engineering	CIVE 2010	4.5
Professional Engineering Design Practice	ENGG 2004	4.5
Civil Engineering Techniques	CIVE 2009	4.5
Road Design and Traffic Management	CIVE 2012	4.5
THIRD YEAR
First Semester (Study Period 1, 2 or 3)
Business Management for Engineers	ENGG 3006	4.5
Soil Mechanics	CIVE 3008	4.5
Steel and Timber Design	CIVE 3013	4.5
Hydraulics and Hydrology	CIVE 3009	4.5
Second Semester (Study Period 4, 5 or 6)
Geotechnical Engineering	CIVE 3007	4.5
Reinforced Concrete Design	CIVE 3003	4.5
Structural Analysis	CIVE 3011	4.5
Water Resources Systems Design	CIVE 3010	4.5
FOURTH YEAR
First Semester (Study Period 1, 2 or 3)
Industrial Experience N	ENGG 3005	0	Note(s): 4	Rule(s): 1
Engineering Capstone Experience A	ENGG 4007	4.5
Engineering Honours Project A	ENGG 4009	4.5
Civil Engineering Elective 1		4.5	Note(s): 1
Advanced Concrete Structures	CIVE 5079	4.5	Note(s): 2
Second Semester (Study Period 4, 5 or 6)
Engineering Capstone Experience B	ENGG 4008	4.5
Engineering Honours Project B	ENGG 4010	4.5	Note(s): 3
Earthquake and Masonry Engineering	CIVE 4036	4.5
Advanced Steel Structures	CIVE 5080	4.5	Note(s): 2

Electives

Course name	Area and cat no.	Units
SP1, SP2, SP2 - CIVIL ENGINEERING ELECTIVES
Coastal Environments	BIOL 4001	4.5
Community Service Learning Project 1	EDUC 4186	4.5
Green Infrastructure	CIVE 5085	4.5
Transportation Engineering	CIVE 4039	4.5
Work Integrated Learning	ENGG 4006	4.5
Principles of Project Management	BUSS 5142	4.5
Water and Wastewater Treatment	CIVE 5094	4.5
SP4, SP5, SP6, SP7 - CIVIL ENGINEERING ELECTIVES
Project Control Methods	BUSS 5163	4.5
Project Leadership and Teams	BUSS 5102	4.5
Work Integrated Learning	ENGG 4006	4.5
Community Service Learning Project 1	EDUC 4186	4.5
Climate Change Adaptation	CIVE 5074	4.5
Environmental Engineering and Modelling	CIVE 4038	4.5
Advanced Soil Mechanics	CIVE 5083	4.5
Construction in the Workshop	BUIL 2024	4.5
Construction on Site	BUIL 2023	4.5
Design of Flood and Drainage Systems	CIVE 5065	4.5
Water Quality Modelling	CIVE 5066	4.5

Rules & notes

Rules

1. It is a requirement of Engineers Australia that students achieve at least 12 weeks industry experience and exposure to professional practice prior to graduation. Assessment in the industrial experience course will remain incomplete until the student completes their portfolio and receives a pass.

Notes

1. Not all electives will be offered every year. Other options not listed here may only be taken with the prior agreement of the Program Director.

2. To enrol in a course with a catalogue number starting with 5 (e.g. CIVE 5xxx), students need to apply for a career permission override via myEnrolment and gain approval first.

3. With Program Director approval, students may enrol in Engineering Honours Project B Extended and complete an extended 9 unit project. Students will complete this course in lieu of Engineering Honours Project B and Engineering Capstone Experience B.

4. Students can also meet the Industrial Experience requirement of the program by completing a 13.5 unit or 18 unit Internship placement. Contact the Program Director for more information.

Professional accreditation and recognition

This program is professionally accredited by Engineers Australia and is designed to meet the requirements for graduate membership of Engineers Australia and comparable international institutions.