Bachelor of Engineering (Civil)

Degree Level Undergraduate

Years

International students

Campus
Mawson Lakes

Duration
4 year(s) full-time

Program Code
LBMI

Prerequisites
SACE Stage 2 Math Studies
More info

Assumed Knowledge
SACE Stage 2 Physics
More info

Fees
AUD$ 31,500 per annum (per 1.0 EFTSL) for students enrolled in 2016

English Language Requirements

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Equivalent English qualifications (PDF)

International Admission by Country
See full entry requirements

CRICOS Code
056091G

Entry requirements

Admission criteria

The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.

Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.

To be eligible for selection, applicants are required to have:

Completed the South Australian Certificate of Education (SACE); and

completed 200 credits of subjects;
achieved a grade of C* or better in the Personal Learning Plan, 20 credits of literacy, 10 credits of numeracy and the Research Project at Stage 2;
achieved a grade C- or better in an additional 60 credits at Stage 2;
obtained a competitive ATAR.

* For Stage 2 subjects a grade of C- or better is required

Alternatively, the minimum educational requirements may be met by those who have fulfilled prerequisite requirements and:

completed the equivalent secondary education qualifications as required for university entry under SACE;
completed the International Baccalaureate Diploma, obtaining a minimum score of 24 points and fulfilled any prerequisite requirements;
completed or partly completed a recognised higher education program at a recognised higher education + institution and fulfilled any prerequisite requirements;
completed at least four Open Universities Australia (OUA) courses at the appropriate level and fulfilled any prerequisite requirements;
completed an award from TAFE or from another registered training organisation at AQF Certificate IV or above and fulfilled any prerequisite requirements;
Qualified for Special Entry and fulfilled any prerequisite requirements;
completed the University Foundation Studies, Applied Science and Engineering program;
completed the Associate Degree in Engineering program at the University of South Australia.

Essential requirements for admission

Prerequisites

SACE Stage 2 Math Studies

Assumed Knowledge

SACE Stage 2 Physics

English language entry requirements

In addition, international students who speak English as a foreign language must have obtained one of the following standards within the last two years prior to admission. Possession of one or more of these qualifications, in addition to the academic entry requirements, does not, in itself, guarantee a place at the University of South Australia. Applications are considered on an individual basis and selection is competitive. Where previous study/work experience was conducted in English, the application must be accompanied by certified documentation from the educational institution/employer certifying that the language of instruction/employment was English.

English language test

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Please access the following link for a comprehensive list of English language tests accepted by UniSA and other important information in relation to meeting the University’s language requirements: English Language Equivalence Table (PDF)

Admission Requirements by Country

Eynesbury FSP	350
German Abitur	2.7
India (best 4)	65
Kenya KCSE (average)	B+
Malaysia STPM (best 3)	7
Malaysia UEC	28
Norway GPA	3.5
Pakistan HSSC	85
Sri Lanka A Levels (best 3)	7
Sweden GPA	15
UK Board GCE A Levels/HK Board	7
USA SAT (2400)	1640
Vietnam	8
Australia	75
Bangladesh HSC	4
IB (best 6)	27
Nepal HSEB	65
Canada High School (OSSD)	70
HKDSE	18

View full entry requirements Hide full entry requirements

To apply for the next intake, please see the Bachelor of Engineering (Honours) (Civil) (LHMI).

Aim

The program aims to prepare students for a professional career in Civil Engineering with emphasis on project-based and industry focussed learning for sustainable development of infrastructure.

Content & Structure

The first two years of the program provide a broad base in engineering and science courses needed for civil engineering careers as well as providing hands on experience in areas such as road design and surveying, and an introduction to the main specializations available in civil engineering. In third year students focus in detail on the disciplines of structural, water and wastewater, geotechnical and environmental engineering - and their interaction with the environment. Fourth year provides students with the opportunity to continue with a broad cross-section of civil engineering studies through the choice of 4 electives and two major projects. Half of the fourth year is devoted to project work, both design and investigation.

Total units to complete the program are 144. It is possible to complete this program in less than four years by undertaking courses offered during study periods 1, 4 and 7. This accelerated option will be offered by the Program Director to students who achieve outstanding grades in the first year.

What courses you'll study

Course name	Area and cat no.	Units	Reference
FIRST YEAR
First Semester (Study Period 1, 2 or 3)
Computer Techniques	COMP 1036	4.5
Engineering Materials	RENG 1005	4.5
Mathematical Methods for Engineers 1	MATH 1063	4.5
Sustainable Engineering Practice	ENGG 1003	4.5
Second Semester (Study Period 4, 5 or 6)
Mathematical Methods for Engineers 2	MATH 1064	4.5
Engineering and Environmental Geology	EART 3012	4.5
Engineering Mechanics	MENG 1012	4.5
Engineering Design and Innovation	ENGG 1004	4.5
SECOND YEAR
First Semester (Study Period 1, 2 or 3)
Engineering Modelling	MATH 2009	4.5
Mechanics of Materials	CIVE 2005	4.5
Geospatial Science for Engineers	CIVE 2001	4.5
Elective		4.5	Note(s): 3
Second Semester (Study Period 4, 5 or 6)
Introduction to Water Engineering	CIVE 2010	4.5
Water Chemistry	CIVE 2011	4.5
Civil Engineering Practice	CIVE 2009	4.5
Road Design and Traffic Management	CIVE 2012	4.5
THIRD YEAR
First Semester (Study Period 1, 2 or 3)
Professional Engineering Practice E	EEET 3033	4.5
Soil Mechanics	CIVE 3008	4.5
Steel and Timber Design	CIVE 3013	4.5
Hydraulics and Hydrology	CIVE 3009	4.5
Second Semester (Study Period 4, 5 or 6)
Water Resources Systems Design	CIVE 3010	4.5
Geotechnical Engineering	CIVE 3007	4.5
Reinforced Concrete Design	CIVE 3003	4.5
Structural Analysis	CIVE 3011	4.5
FOURTH YEAR
First Semester (Study Period 1, 2 or 3)
Industrial Experience N	ENGG 3005	0
Civil Engineering Design Project	CIVE 4008	9
Civil Engineering Elective 1		4.5	Note(s): 2,4
Civil Engineering Elective 2		4.5	Note(s): 2,4
Second Semester (Study Period 4, 5 or 6)
Civil Engineering Project Formulation	CIVE 4031	4.5
Civil Engineering Investigation Project	CIVE 4030	4.5
OR
Civil Engineering Honours Project	CIVE 4029	4.5
Civil Engineering Elective 3		4.5	Note(s): 2,4
Civil Engineering Elective 4		4.5	Note(s): 2,4

Electives

Course name	Area and cat no.	Units
First Half (Study Period 1, 2 or 3) Civil Engineering Electives 1 & 2
Research Data Analysis	CIVE 5015	4.5
Principles of Project Management	BUSS 5142	4.5
Coastal Environments	BIOL 4001	4.5
Environmental Conflict and Public Consultation	ENVT 3020	4.5
Water Quality Processes	CHEM 5007	4.5
Seminar in Sustainability	ENVT 5007	4.5
Traffic Engineering	CIVE 5022	4.5
Water Quality Modelling	CIVE 5066	4.5
Community Service Learning Project 1	EDUC 4186	4.5
Civil Engineering Advanced Topics 1	CIVE 4027	4.5
Prestressed Concrete Design	CIVE 4034	4.5
Design of Composite Structures	CIVE 4037	4.5
Project Governance and Ethics	BUSS 5387	4.5
Environmental Engineering and Modelling	CIVE 4038	4.5
Second Half (Study Period 4, 5 or 6) Civil Engineering Electives 3 & 4
Cold-formed Steel Design	CIVE 4035	4.5
Earthquake and Masonry Engineering	CIVE 4036	4.5
Land Use Planning	ARCH 1011	4.5
Civil Engineering Advanced Topics 2	CIVE 4028	4.5
Environmental Policy and Regulations	ENVT 2014	4.5
Environmental Impact Assessment N	ARCH 5041	4.5
Water Quality Management	CIVE 5067	4.5
Transport Modelling	CIVE 5025	4.5
Sustainable Development: A Global Perspective	POLI 2019	4.5
Design of Flood and Drainage Systems	CIVE 5065	4.5
Project Control Methods	BUSS 5163	4.5
Project Leadership and Teams	BUSS 5102	4.5
Road Safety Engineering	CIVE 5021	4.5

Rules & notes

Notes

1. It is a requirement of Engineers Australia that students complete a minimum period of 12 weeks of industrial experience in a relevant industry prior to graduation. Assessment in the course Industrial Experience N will remain incomplete until the student submits a written report and receives a pass.

2. Civil Engineering Electives may be chosen from the courses listed in the schedule above. Not all courses may be available each study period. Not all electives will be offered every year. Other options not listed in the schedule may only be taken with the prior agreement of the Program Director.

3. Students may select a freely chosen Elective course from any other School or Division. A list of elective courses is available from the UniSA website. The selection will be subject to availability and satisfaction of pre-requisite requirements.

4. Students enrolling in specialisation electives from the Masters programs (courses that have a number starting with 5) will need to complete a career permission override form and get it signed by the School.