Bachelor of Engineering (Honours) (Civil and Construction Management)
Degree Level Undergraduate
Year 2023
You're viewing degree information for Australian students
You're considered an Australian student if you are any of the following:
- Australian or New Zealand Citizen
- Australian Permanent Resident (including Permanent Humanitarian Visa holders)
Program Code
LHMI
SATAC Code
434151 (Internal)
Study as
Full-time
or part-time
Prerequisites
SACE Stage 2 Math Methods
More info
Assumed Knowledge
SACE Stage 2 Physics
More info
Admissions
Student Profile
Entry Scores
2023 Guaranteed Entry
Year 12 (ATAR-based): 72.00
Year 12 (Grades-based): B,B,B
TAFE/RTO: DIP
View Guaranteed Entry Info
2022 Cut-Offs
Year 12 (ATAR-based):
- Internal: 74.60
TAFE/RTO: Cert IV
View full entry requirements
-
View full entry requirements Hide full entry requirements
Entry requirements
Admission criteria
The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.
Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.
Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:
Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND- Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
- Complete secondary qualifications equivalent to SACE, or
- Complete the International Baccalaureate Diploma with a minimum score of 24 points
Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.
OR
Higher education study- Complete or partly complete a recognised higher education program at a recognised higher education institution, or
- Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above, or
- Complete the Associate Degree in Engineering at the University of South Australia
OR
Vocational Education and Training (VET)- Complete an award from a registered training organisation at Certificate IV or above
OR
Work and life experience- Qualify for Special Entry, or
- Complete a UniSA Foundation Studies program or equivalent, or
- Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past
Essential requirements for admission
Prerequisites
SACE Stage 2 Math MethodsAssumed Knowledge
SACE Stage 2 Physics
This program allows progression to fast-track Masters. Visit Fast-track to Masters in STEM for more information.
Degree overview
- Study at SA's number one university for graduate skills in engineering1.
- Access the Engineering Experience One Studio and the largest strong floor in the southern hemisphere.
- Professionally accredited by Engineers Australia (EA), graduates are eligible for membership with EA and comparable international institutions.
- Gain valuable, relevant work experience and professional competencies through the UniSA STEM Professional Practice Program.
- Learn in specialist, industry-standard facilities and use high-tech testing and computer modelling equipment.
- Start now, decide later. Flexible entry pathways and common first-year across all Engineering Honours programs so you can change your specialisation based on your interests.
- Access a new pathway option to complete the required mathematical prerequisite.
1ComparED (QILT) Student Experience Survey 2020-21, Skills Development Indicator (Undergraduate and Postgraduate). SA public universities.
Snapshot
Construction Managers supervise various design and construction projects from beginning to end. This degree will prepare you to pursue a career in this competitive and highly sought-after field.
Professionally accredited by Engineers Australia, The Bachelor of Engineering (Honours) (Civil and Construction Management) is strongly hands-on. You will apply engineering theory to real-world challenges, and in your final year, complete a major honours research project, as well as an industry-related design project.
Throughout your degree you’ll learn in our specialist industry-standard facilities. We have the largest strong floor in the southern hemisphere and a 1200m long hydraulic testing facility. You’ll also learn to use high-tech testing and computer modelling equipment.
Through the UniSA STEM Professional Practice Program you’ll gain at least 450 hours of skills and competencies to ensure you graduate career ready. You will have access to a range of engagement activities such as placements, internships, guest lectures, industry panels, site visits, events and networking opportunities. Hear more about the benefits of the UniSA Industry experience from graduates William, Franke and Teresa here.
Enjoy a common first-year across most IT degrees enabling you to switch between specialisations and receive credit for completed courses. This means if you change your mind about your IT specialisation after first-year, you can change programs and still complete your degree in 4 years full-time. Start now, decide later.
New Pathway options for Engineering
If you haven’t completed SACE Stage 2 Mathematical Methods and want to study engineering, consider our Bachelor of Engineering (Honours) (Flexible Entry). You’ll study first year courses, and catch up on the required prerequisite, before transferring into your preferred engineering specialisation with up to one year of credit.
What you'll learn
In your first year you will develop a strong, general foundation in engineering. You’ll then move into your civil engineering major. From third year onwards you will commence construction management courses, such as Construction Scheduling and Advanced Construction Management.
The UniSA STEM Professional Practice Program then allows you to apply the skills and knowledge you've acquired throughout your degree in real-world settings.
At least half of your honours year will involve a major project. Projects are generally supported by industry clients or based in a research area like the Sustainable Infrastructure and Resource Management concentration.
You will also undertake the Engineering Capstone Experience course with other engineering students. This course will see you complete real projects provided by industry, with industrial representatives acting as your clients. You will work through the real-life stages of a project from developing a tender through to feasibility, concept development and detailed design. See examples of student projects: Project 1 and Project 2.
You can gain an extra qualification and broaden your career prospects by completing a Diploma in Languages.
Study hours
For each course you study, you will need to allocate time for various classes such as lectures, tutorials, workshops, seminars and practicals. Plus you will need additional hours to study in your own time to complete assignments, readings and projects, as well as to contribute to online discussion forums (independent study). So as a general rule, if you are studying full-time you would need to allocate 12–26 hours of study when at university and 14–28 hours of independent study per week.
Assessment
Your studies at UniSA will incorporate practical, professionally-focused and research-based learning, so assessment types will vary. You can expect them to include:
- reports, project documentation, case studies and presentations
- essays and assignments examinations
- industry-relevant, research-based projects
- practical, team-based projects
Global opportunities
Enrich your studies and your life – make overseas study part of your qualification. You may have the option to undertake an exchange, short-term program or study tour overseas while you study. We have links with universities worldwide, as well as a range of travel grants available to make going overseas much more accessible.
You can choose short-term or semester-long study from a range of universities and countries depending on your area of study and cultural interests.
Take a look at the global opportunities available.
Honours
This is a four-year, professional degree with honours. The honours component includes a minimum of one year of advanced studies in research and professional practice. You will receive First Class, Second Class or Third Class Honours, depending on your performance.
You will graduate with industry experience and connections, and a higher-level qualification than a bachelor degree. Your honours year is designed to prepare you for future leadership roles in civil engineering and project management.
Why Bachelor of Engineering (Honours) (Civil and Construction Management)
Our civil engineering degrees have been designed with flexibility in mind. This degree, with a major in civil and construction management, will see you learning to plan, implement and deliver projects while keeping to deadlines and budget. You will get hands-on experience and knowledge in areas such as:
- road design and traffic management
- surveying and spatial sciences
- soil mechanics
- hydraulics and hydrology
- geotechnical engineering
- project and construction management
- structural engineering
All of our Engineering Honours programs share a common first-year, so choosing this degree offers ultimate flexibility. Should you wish to pursue a different specialty after completing your first-year, you can switch to an alternative Engineering program and receive credit for the courses completed. Start now, decide later.
4+1 Pathway to Masters
Are you interested in gaining a postgraduate degree with just one extra year of study? You can package the Bachelor of Engineering (Honours) (Civil and Construction Management) with the Master of Engineering (Civil and Infrastructure) or the Master of Engineering (Engineering Management) with our Fast-track to Masters programs. This unique offering allows you to develop advanced expertise and broaden your career opportunities. You will graduate in just five years, instead of the typical six.
Study at UniSA
Hear from Amelia a UniSA civil engineering and construction management graduate.
Your career
For civil engineers in Australia, employment growth of 15.2 per cent is expected by November 20251. Careers to consider:
- civil engineer: design, construction and testing of physical infrastructure; assessing the impact of large-scale projects on the environment
- geotechnical engineer: advising on ways to guard and maintain structures such as soil and rock formations and groundwater deposits; planning and developing building and construction projects; advising on tools, methods and materials for construction in an area
- construction manager: overseeing and allocating resources for construction projects; working with architects and engineers to check plans and blueprints; managing timetables; determining material and labour costs; liaising with and hiring subcontractors and workers
- project engineer or manager: managing a whole project cycle, from scoping and concept through to development or build; financial, technical and team responsibilities
Explore a range of engineering and construction careers here.
1 Australian Government, Occupation Projections 2020
Professional accreditation and recognition
This program is professionally accredited by Engineers Australia and is designed to meet the requirements for graduate membership of Engineers Australia and comparable international institutions.
Industry facts
Applying to study with us:
- go to the top of this page and make note of the SATAC code, then click Apply
- you will be redirected through to the SATAC website to continue your application
Alternative Pathways
There are a wide variety of pathways into studying Engineering at UniSA.
Find an Alternative Pathway
Deferment
This degree is available for deferment. This option is made available by responding to your offer during the application process via the SATAC website. Applicants who receive an offer into a midyear degree are eligible to defer for six months.
Scholarships
Every year, over 2,500 UniSA students are supported in their studies through scholarships and grants worth millions of dollars. Check out the scholarships below. One of them may be perfect for you. Visit our scholarships page for more.
UniSA Excellence Scholarships
$5,000 scholarship for South Australian students with an ATAR of 99 who enrol to study a UniSA undergraduate degree.
UniSA Outstanding Achievement Scholarship
Up to $10,000 per annum (full time) for South Australian students who obtain an ATAR of 99.95 or IB equivalent and enrol to study at UniSA.
Study on Demand with Australia's University of Enterprise
UniSA Online – 100% online degrees designed specifically for online learning.
Your study experience and support
Our campuses are home to fantastic facilities including modern lecture theatres, libraries, workshops and laboratories, as well as spaces that simulate real work environments. But you’ll also discover that your journey at UniSA is about social experiences, healthy living and getting involved. You’ll find student sports and fitness facilities, community clinics, tech zones and chill-out spaces. There are campus sport activities to keep you active, and if you are keen to explore the social side of university life, there are movies, cooking demonstrations, parties and loads more.
Adelaide also has a variety of accommodation options to suit different requirements and budgets. Options include dedicated student accommodation and private rentals. See our long-term accommodation pages, or explore our student accommodation by Scape on Bank Street in Adelaide’s lively cultural precinct, an ideal location for students. It is within easy reach of UniSA’s city and metropolitan campuses, Rundle Mall shopping, the Central Market, Chinatown, and the West End’s vibrant nightlife. It is also across the road from the Adelaide train station, and on bus and tram routes.
Student services
Our student services provide you with all the support you need at university. We want you to succeed, and if you need help, we're here to assist. You can access a full range of support services, including:
- academic counselling
- personal counselling
- social support services, including family support and nearby childcare
- common rooms
- prayer rooms
- security officers
- career services and mentoring
- Wirringka Student Services, offering Aboriginal and Torres Strait Islander students a supportive place to study
- as well as services offered through our student association, USASA.
When you become a UniSA student, you can also contact Campus Central for help with anything related to your degree. They will help you with your enrolment, ID cards, fees, timetables and more.
24/7 digital environment
Our learnonline facilities include a personal learning environment with virtual classrooms, lecture recordings, emails, learning support, administration, library access and results. The environment is available 24 hours a day, seven days a week, so you can tailor your learning to your life. We are continually investing in innovative digital technologies for a high-quality student learning experience.
Your study spaces
As a UniSA engineering student you will enjoy access to the latest industry technology and tools in our engineering spaces.
- Experience One Studio: a unique first year engineering space with open studio, small group and learning spaces as well as chill out areas.
- Engineering Experience Studio for second and third year students.
- Experiential Learning Space: a collaborative, innovation space for final year students, postgraduate and research students, leading researchers and industry partners to work side-by-side in a flexible, open and creative environment.
- Industry-standard facilities: the largest strong floor in the southern hemisphere and a 1,200 metre long hydraulic testing facility.
- Engineering Mechatronics Lab: a laboratory to explore robotics, machine tool control, and automated guided vehicles.
Your program director
I have worked for UniSA as a structural lecturer since 2013 and, in 2020, took on the role of program director for the civil and surveying programs. Prior to joining the University, I worked as a consulting engineer in the structural field since graduating from UniSA in 1995. I have worked locally and internationally, having designed a wide variety of projects across Australia and Asia during that time. I came to Uni to share my knowledge and to teach students about the design process. I have research interests in the durability of concrete and other more teaching focussed areas. Please feel free to knock on my door and ask me any questions related to your study, engineering or my experiences.
-
How do I apply?
There are a number of ways to apply to study UniSA's undergraduate and postgraduate coursework degrees.
Applications for admission into the University of South Australia’s undergraduate and most postgraduate degrees are made via the South Australian Tertiary Admissions Centre (SATAC). Visit satac.edu.au and follow the links.
For the MBA degrees please apply through the UniSA MBA Application Portal. Applications for a small number of degrees are submitted direct to UniSA through our Apply Online portal. It will be noted on the degree page if you need to apply via Apply Online.
Postgraduate study by research
For information on applying to do postgraduate study by research, including Master of Research, PhDs or Doctorates, please visit unisa.edu.au/resdegrees. -
Is there a closing date for applications?
Undergraduate
Yes. The deadline to apply to study a degree at UniSA for semester one (commencing late February) and be given equal consideration is in early December. While you may be able to apply after this date, you are not guaranteed to be considered equally with other applicants and your application may not be assessed in time for the main round of offers (mid January). Some degrees will not make any offers after the main offer round. Please click here find all of the key dates for applications here.Postgraduate
Most postgraduate degrees do not have a closing date for applications. However, there are exceptions, so it is best to check – either on the SATAC website, Apply Online or the degree homepage. Postgraduate offers are normally ‘rolling’, meaning they may be sent out at any time up until the program starts. This also means that applications may close at any time without warning, if the quota is filled earlier. For this reason, postgraduate applications should be submitted without delay. For more information, please contact our Future Student Enquiries team on (08) 8302 2376 or via the online enquiry form. -
What credit can I receive for previous studies?
Credit transfer or advanced standing
You may be eligible to receive a credit transfer or advanced standing for your chosen UniSA degree based on your previous studies, if they are in a related area at an equivalent or higher level. Receiving a credit transfer will reduce the number of courses you undertake within the degree, and may also reduce the overall duration of your degree.
Recognised prior learning
If you have related industry experience, you may also be eligible to receive recognised prior learning for this experience. Receiving recognised prior learning will normally reduce the number of courses you undertake within the degree, and can reduce the duration of the degree.
How do I get credit?
Credit transfer and recognition of prior learning is assessed on a case-by-case basis by the Program Director who will discuss your prior learning and experience with you to ascertain what credit you may be eligible for.
Many of our credit transfer arrangements are listed on our online Credit Assessor.
-
Can I speak to someone regarding my study options?
UniSA welcomes the opportunity to speak with you regarding your study options. Our staff are able to talk to you about degree information, career outcomes and pathways, entry requirements, applications, and student life, so that you are able to make the best study decision for your future.
Click here to book a 1:1 appointment with one of our enquiries team.
If you are interested in studying an MBA please contact admissions@unisa.edu.au and our Future Student Enquiries team will contact you regarding your enquiry.
Alternatively, you can complete a MyCareerMatch career profile. MyCareerMatch is an online career profiling tool that you can use free-of-charge through UniSA. MyCareerMatch specialises in career profiles and provides you with a personalised career report outlining information about your personality style and a list of career options, which are complementary to your natural strengths and talents.
We have many events throughout the year where you can speak with a lecturer or tutor about your degrees of interest. You can find out what is happening at UniSA by visiting our events page or by signing up to our mailing list, so you're the first to know about careers events, information sessions, degree requirements, scholarships and more!
There are also many career counsellors external to the University that you can discuss your career options with. If you are unsure where to start your search, you can contact the Government's Work Ready team (formally Skills for All). Visit skills.sa.gov.au or call 1800 506 266.
You may also find Job Outlook a helpful resource in your decision-making.
-
Where can I get further information?
It can be difficult to decide what degree you would like to do and where. You might find information from government organisations will help to weigh up your degree and provider options.
Find a course or a provider
TEQSA is a regulatory body for higher education providers. Use the TEQSA national register of higher education providers to search for a course or a provider. Compare courses and providers for undergraduates and postgraduates using the Quality Indicators for Learning and Teaching (QILT) online comparison tool.
More information on university admission
Visit the SATAC website to find out important news, events and information on applying to university in South Australia. Visit Study with Us to find out everything you need to know about studying at UniSA, admissions and the application process.
Questions about your application
If you have any questions or concerns regarding your application you should contact the Future Students Enquiries team in the first instance.
What others are saying
UniSA really teaches you how to adapt to different situations, no matter what degree you study. Seeing how much I’ve progressed from when I started to now has got me excited for the future. Choosing UniSA was 100% the right choice.
Amelia Rosella
Bachelor of Engineering (Honours) (Civil and Project Management)
Graduate Engineer | Hansen Yuncken
