Bachelor of Engineering (Honours) (Electrical and Mechatronic) (Pathway to Master of Engineering (Engineering Management))

Degree Level Undergraduate

Years

International students

Start date
February
July

Campus
Mawson Lakes

Duration
4 year(s) full-time

Mode
On-campus

Program Code
LHIF

Prerequisites
SACE Stage 2 Math Methods
More info

Assumed Knowledge
SACE Stage 2 Physics
More info

Fees
AUD$ 35,900 per annum (per 1.0 EFTSL) for students enrolled in 2022

English Language Requirements

IELTS total [6]
IELTS reading [6]
IELTS writing [6]

Equivalent English qualifications (PDF)

International Admission by Country
See full entry requirements

CRICOS Code
081811E

Entry requirements

Admission criteria

The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.

Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.

Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:

Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND

Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
Complete secondary qualifications equivalent to SACE, or
Complete the International Baccalaureate Diploma with a minimum score of 24 points

Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.

OR
Higher education study

Complete or partly complete a recognised higher education program at a recognised higher education institution, or
Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above, or
Complete the Associate Degree in Engineering at the University of South Australia

OR
Vocational Education and Training (VET)

Complete an award from a registered training organisation at Certificate IV or above

OR
Work and life experience

Qualify for Special Entry, or
Complete a UniSA Foundation Studies program or equivalent, or
Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past

Essential requirements for admission

Prerequisites

SACE Stage 2 Math Methods

Assumed Knowledge

SACE Stage 2 Physics

English language entry requirements

In addition to meeting academic entry requirements, international students who speak English as a second or additional language must also meet the University's English language entry requirements. The minimum language requirements for this program are:

English language test

IELTS total [6]
IELTS reading [6]
IELTS writing [6]

Please access the following link for a comprehensive list of English language tests accepted by UniSA and other important information in relation to meeting the University’s language requirements: English Language Equivalence Table (PDF)

Admission Requirements by Country

Nepal NEB	2.61
Bangladesh HSC	4
Canada High School (OSSD)	65
Eynesbury FSP	330
German Abitur	3.5
India (best 4)	65
Kenya KCSE (average)	B+
Malaysia STPM (best 3)	6
Malaysia UEC	30
Norway GPA	3
Pakistan HSSC	85
Sri Lanka A Levels (best 3)	7
Sweden GPA	13
UK Board GCE A Levels/HK Board	7
Vietnam	7.5
Australia	72
IB (best 6)	26
USA SAT (1600)	1110
HKDSE	16

View full entry requirements Hide full entry requirements

Aim

To prepare graduates for a professional career in the electrical engineering discipline with particular emphasis on mechatronic engineering.

Content & Structure

The Bachelor of Engineering requires completion of courses totalling 144 units, and comprises a common first year across all Engineering disciplines. The first two years of the program lay the foundation of mathematics,
physics, computing, signal analysis, circuit analysis, electronics communications principles, and mechanical engineering practice. In the third year, students concentrate on mechatronic systems and their dynamics, as well
as taking a set of common courses in electrical machines, control systems and embedded systems.

The program provides students with the opportunity to integrate these studies into the development of mechatronic systems in areas such as power systems, transportation systems, biomedical systems, manufacturing, automation and robotics. An integrating project course is taken in the second half of the third
year, which enables students to synthesise and apply the skills and knowledge accumulated throughout the program. Work-integrated learning is facilitated through the UniSA STEM Professional Practice Program,
requiring students to gain at least 450 hours (60 days FTE) of skills and competencies through a range of engagement activities such as placements, internships, guest lectures, industry panels, site visits, networking and events.

Further specialist courses are offered in the final year. There is an emphasis throughout the program on preparing students for professional engineering practice and on the application of knowledge to practical engineering problems, including the application of systems engineering principles to designing and implementing complex systems. The degree develops professional engineering skills in a capstone experience project, and research abilities in an honours project, both of which spanning the full duration of the final year.

What courses you'll study

Course name	Area and cat no.	Units	Reference
FIRST YEAR
First Semester (Study Period 1, 2 or 3)
Mathematical Methods for Engineers 1	MATH 1063	4.5
Engineering Materials	RENG 1005	4.5
Programming Concepts	COMP 1045	4.5
Sustainable Engineering Practice	ENGG 1003	4.5
Second Semester (Study Period 4, 5 or 6)
Mathematical Methods for Engineers 2	MATH 1064	4.5
Electrical and Electronic Systems	EEET 1027	4.5
Engineering Mechanics	MENG 1012	4.5
Engineering Design and Innovation	ENGG 1004	4.5
SECOND YEAR
First Semester (Study Period 1, 2 or 3)
Design Management for Engineers	ENGG 3006	4.5
Electrical Circuit Analysis	EEET 1003	4.5
Mechanical Engineering Practice	MENG 2009	4.5
Mathematical Methods for Engineers 3	MATH 2028	4.5
Second Semester (Study Period 4, 5 or 6)
Digital Logic Fundamentals	EEET 1026	4.5
Analogue Devices and Circuits	EEET 2018	4.5
Signals and Systems	EEET 3041	4.5
Project Management for Engineers	ENGG 2004	4.5
THIRD YEAR
First Semester (Study Period 1, 2 or 3)
Microcontroller Interfacing and Applications	EEET 2045	4.5
Electrical Machines	EEET 3032	4.5
Control Systems	EEET 3046	4.5
Electromechanics	EEET 2044	4.5
Second Semester (Study Period 4, 5 or 6)
Digital Communications	EEET 3028	4.5
Engineering Dynamics	MENG 2014	4.5
Industrial Automation Systems	EEET 3044	4.5
Embedded System Design	EEET 3048	4.5
FOURTH YEAR
First Semester (Study Period 1, 2 or 3)
Industrial Experience	MENG 3007	0	Note(s): 2	Rule(s): 1,2
Advanced Control and Signal Processing	EEET 4071	4.5
Machine Learning and Vision Systems	MFET 4015	4.5
Engineering Capstone Experience A	ENGG 4007	4.5
Engineering Honours Project A	ENGG 4009	4.5	Note(s): 1
Second Semester (Study Period 4, 5 or 6)
Mobile Autonomous Robotic Systems	EEET 4070	4.5
Integrated Industrial Actuation	MENG 4019	4.5
Engineering Capstone Experience B	ENGG 4008	4.5
Engineering Honours Project B	ENGG 4010	4.5	Note(s): 1

Rules & notes

Rules

1. It is a requirement of Engineers Australia that students achieve at least 450 hours (60 days FTE) of discipline and/or industry related skills and competencies by completing the UniSA STEM Professional Practice Program (PPP) prior to graduation. These hours can be gained through a range of professional engagement activities such as placements, internships, guest lectures, industry panels, site visits, networking and industry events. For more information please contact the UniSA STEM Industry Experience team at STEM.Placements@unisa.edu.au.

2. Upon completion of the UniSA STEM Professional Practice Program (PPP) students will be invited to enrol in this course and complete the required assessment for the course. The student will not be eligible to graduate until they have obtained a Non-Graded Pass (NGP) for this course.

Notes

1. With Program Director's approval, students may enrol in Engineering Honours Project B Extended and complete an extended 9 unit project. Students will complete this course in lieu of Engineering Honours Project B and Engineering Capstone Experience B.

2. Students can gain UniSA STEM Professional Practice Program hours by completing a 13.5 unit or 18 unit Internship placement. Contact the Program Director for more information.

3. Please refer to the LMEB Master of Engineering (Engineering Management) program home page for information relating to the courses that will be studied in the Master program.