You're viewing degree information for International students

You're considered an International student if you are:

NOT an Australian or New Zealand citizen
NOT an Australian Permanent Resident (including Humanitarian Visa holders)

Not an International student? Switch to Australian content

Bachelor of Engineering (Honours) (Mechanical)

Degree Level Undergraduate

Years

International students

Start date
February
July

Campus
Mawson Lakes

Duration
4 year(s) full-time

Mode
On-campus

Program Code
LHMR

Prerequisites
SACE Stage 2 Math Methods
More info

Assumed Knowledge
SACE Stage 2 Physics
More info

Fees
AUD$ 42,000 per annum (per 1.0 EFTSL) for students enrolled in 2025

English Language Requirements

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Equivalent English qualifications (PDF)

International Admission by Country
See full entry requirements

CRICOS Code
081816M

Entry requirements

Admission criteria

The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.

Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.

Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:

Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND

Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
Complete secondary qualifications equivalent to SACE, or
Complete the International Baccalaureate Diploma with a minimum score of 24 points

Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.

OR
Higher education study

Complete or partly complete a recognised higher education program at a recognised higher education institution, or
Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above, or
Complete the Associate Degree in Engineering at the University of South Australia

OR
Vocational Education and Training (VET)

Complete an award from a registered training organisation at Certificate IV or above

OR
Work and life experience

Qualify for Special Entry, or
Complete a 12-month UniSA Foundation Studies program or equivalent, or
Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past

Essential requirements for admission

Prerequisites

SACE Stage 2 Math Methods

Assumed Knowledge

SACE Stage 2 Physics

English language entry requirements

In addition to meeting academic entry requirements, international students who speak English as a second or additional language must also meet the University's English language entry requirements. The minimum language requirements for this program are:

English language test

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Please access the following link for a comprehensive list of English language tests accepted by UniSA and other important information in relation to meeting the University’s language requirements: English Language Equivalence Table (PDF)

Admission Requirements by Country

Bangladesh HSC	4
India (best 4) Central Board	65
HKDSE	15
Nepal NEB	2.61
Canada High School (OSSD)	65
Eynesbury FSP	330
German Abitur	3.5
Kenya KCSE (average)	B+
Malaysia STPM (best 3)	6
Malaysia UEC	30
Norway GPA	3
Pakistan HSSC	85
Sri Lanka A Levels (best 3)	7
Australia	72
Sweden GPA	13
IB (best 6)	26
UK Board GCE A Levels/HK Board	7
USA SAT (1600)	1110
Vietnam	7.5
India (best 4) State Board	75

View full entry requirements Hide full entry requirements

This program allows progression to fast-track Masters. Visit Fast-track to Masters in STEM for more information.

Aim

The Bachelor of Engineering (Honours) (Mechanical) uses an industry focused, project-based teaching and learning approach to develop professional mechanical engineers who are well prepared to work in diverse, interdisciplinary teams to solve complex problems in a socially and culturally appropriate manner.

Content & Structure

This program requires completion of courses totalling 144 units, and comprises a common first year across all Engineering disciplines. The first two years of the program lay the foundation of mathematics, materials, mechanics, computing, engineering graphics, fluids, thermodynamics and mechanical design principles. In the third year of study, students will concentrate on a set of discipline core courses and a range of specialist electives from their chosen application area, including mechanical design, energy systems, engineering management, business innovation, as well as ship design. A project-based course is placed in the second half of the third year, which enables students to synthesise and apply the skills and knowledge accumulated throughout the program and mandated completion of the UniSA STEM Professional Practice Program. Further advanced courses are offered in the final year.

There is an emphasis throughout the program on preparing students for professional engineering practice as well as on knowledge application to analysing complex engineering problems and to developing and implementing practical solutions. The degree develops professional engineering skills in a Capstone experience project, and research abilities in an Honours project, both of which spanning the full duration of the final year. Industry internship and international exchange opportunities are also available.

From 4 August 2025, the University of South Australia will no longer be accepting applications for new students. Study at Adelaide University.

What courses you'll study

Course name	Area and cat no.	Units	Reference
FIRST YEAR
First Semester (Study Period 1, 2 or 3)
Programming Concepts	COMP 1045	4.5
Engineering Materials	RENG 1005	4.5
Mathematical Methods for Engineers 1	MATH 1063	4.5
Sustainable Engineering Practice	ENGG 1003	4.5
Second Semester (Study Period 4, 5 or 6)
Electrical and Electronic Systems	EEET 1027	4.5
Engineering Design and Innovation	ENGG 1004	4.5
Mathematical Methods for Engineers 2	MATH 1064	4.5
Engineering Mechanics	MENG 1012	4.5
SECOND YEAR
First Semester (Study Period 1, 2 or 3)
Mechanics of Materials	CIVE 2005	4.5
Mathematical Methods for Engineers 3	MATH 2028	4.5
Manufacturing Processes	MFET 2001	4.5
Mechanical Engineering Practice	MENG 2009	4.5
Second Semester (Study Period 4, 5 or 6)
Engineering Dynamics	MENG 2014	4.5
Mechanical Design Practice	MENG 2004	4.5
Fluid and Energy Engineering	MENG 2002	4.5
Project Management for Engineers	ENGG 2004	4.5
THIRD YEAR
First Semester (Study Period 1, 2 or 3)
Energy Conversion and Management	MENG 3005	4.5
Control Systems	EEET 3046	4.5
Computer Aided Engineering Practice	MENG 3003	4.5
Engineering Modelling	MATH 2009	4.5
Second Semester (Study Period 4, 5 or 6)
Design Management for Engineers	ENGG 3006	4.5
Mechanics of Machines	MENG 2008	4.5
Advanced Thermo-Fluid Engineering	MENG 4004	4.5	Note(s): 4
Sustainable Development and Design Practice	MENG 4022	4.5	Note(s): 4
FOURTH YEAR
First Semester (Study Period 1, 2 or 3)
Engineering Industry Experience	ENGG 4017	0		Rule(s): 1,2
Discipline Elective 1		4.5	Note(s): 1,2,4,5	Rule(s): 3
Vibration Analysis of Mechanical Systems	MENG 4034	4.5	Note(s): 4
Engineering Capstone Experience A	ENGG 4007	4.5	Note(s): 3,4
Engineering Honours Project A	ENGG 4009	4.5	Note(s): 3,4
Second Semester (Study Period 4, 5 or 6)
Discipline Elective 2		4.5	Note(s): 1,2,4	Rule(s): 3
Energy System Modelling & Design	MENG 4003	4.5	Note(s): 4
Engineering Capstone Experience B	ENGG 4008	4.5	Note(s): 3,4
Engineering Honours Project B	ENGG 4010	4.5	Note(s): 3,4

Electives

Course name	Area and cat no.	Units
Discipline Elective 1
Total Quality Management	MFET 5022	4.5
Project Planning and Control	MFET 5040	4.5
Intelligent Production Systems	MFET 5055	4.5
STEM Internship 15 Days	NASC 4022	4.5
Discipline Elective 2
Integrated Industrial Actuation and Automation	MENG 4019	4.5
Robotics and Automation	MFET 5023	4.5
Energy and Society	MENG 5005	4.5

Rules & notes

Rules

1. Engineers Australia (EA) requires students to achieve at least 450 hours/60 days full-time equivalent (FTE) of discipline and/or industry related skills and competencies prior to graduation. At UniSA, students must complete the UniSA STEM Professional Practice Program (PPP) to gain these hours through a range of professional engagement activities such as placements, internships, guest lectures, industry panels, site visits, networking, and industry events. Please contact STEM.placements@unisa.edu.au for more information.

2. Upon completion of the UniSA STEM Professional Practice Program (PPP) students will be invited to enrol in this course and complete the required assessment for the course. Students will not be eligible to graduate until they have obtained a Non-Graded Pass (NGP) for this course.

3. At least one of the Discipline Elective courses students enrol in during the final year must have a catalogue number starting with 4 (e.g. MENG 4XXX) or 5 (e.g. MFET 5XXX).

Notes

1. Not all electives will be offered every year. Other options not listed here may only be taken with the prior agreement of the Program Director.

2. To enrol in a course with a catalogue number starting with 5 (e.g. CIVE 5xxx), students need to apply for a career permission override via myEnrolment and gain approval first.

3. Students must undertake a final year project. This can be completed as an on-campus research project or with Program Director's approval as an industry project at a workplace. Contact the Program Director for more information.

4. Students must complete at least 36 units with honours level outcomes. This course may contribute towards the final honours grade for the program.

5. NASC 4022 cannot be used towards honours calculation. This course is subject to availability and students may be required to obtain their own Internship opportunity.

Professional accreditation and recognition

This program is professionally accredited by Engineers Australia and is designed to meet the requirements for graduate membership of Engineers Australia and comparable international institutions.