Study Bachelor of Design (Product Design) at the University of South Australia (UniSA). Information for International students.

Enquire Apply

Entry requirements Degree overview Career outcomes How to apply Study experience

You're viewing degree information for International students

You're considered an International student if you are:

NOT an Australian or New Zealand citizen
NOT an Australian Permanent Resident (including Permanent Humanitarian Visa holders)

Not an International student? Switch to Australian content

International students

Start date
February
July

Campus
City West

Duration
3 year(s) full-time

Mode
On-campus

Program Code
DBPR

Prerequisites
None

Assumed Knowledge
None

Fees
AUD$ 35,600 per annum (per 1.0 EFTSL) for students enrolled in 2025

Admissions
Student Profile

English Language Requirements

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Equivalent English qualifications (PDF)

International Admission by Country
See full entry requirements

CRICOS Code
071953G

Entry requirements

Admission criteria

The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.

Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.

Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:

Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND

Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
Complete secondary qualifications equivalent to SACE, or
Complete the International Baccalaureate Diploma with a minimum score of 24 points

Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.

OR
Higher education study

Complete or partly complete a recognised higher education program at a recognised higher education institution, or
Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above

OR
Vocational Education and Training (VET)

Complete an award from a registered training organisation at Certificate IV or above

OR
Work and life experience

Qualify for Special Entry, or
Complete a 12-month UniSA Foundation Studies program or equivalent, or
Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past

Essential requirements for admission

Prerequisites

None

Assumed Knowledge

None

English language entry requirements

In addition, international students who speak English as a foreign language must have obtained one of the following standards within the last two years prior to admission. Possession of one or more of these qualifications, in addition to the academic entry requirements, does not, in itself, guarantee a place at the University of South Australia. Applications are considered on an individual basis and selection is competitive. Where previous study/work experience was conducted in English, the application must be accompanied by certified documentation from the educational institution/employer certifying that the language of instruction/employment was English.

English language test

IELTS total [6.0]
IELTS reading [6.0]
IELTS writing [6.0]

Please access the following link for a comprehensive list of English language tests accepted by UniSA and other important information in relation to meeting the University’s language requirements: English Language Equivalence Table (PDF)

Admission Requirements by Country

UK Board GCE A Levels/HK Board	6
Vietnam	7
Australia	65
IB (best 6)	26
USA SAT (1600)	1050
India (best 4) State Board	70
India (best 4) Central Board	60
HKDSE	15
Nepal NEB	2.41
Bangladesh HSC	3.5
Canada High School (OSSD)	60
Eynesbury FSP	310
German Abitur	3.8
Kenya KCSE (average)	B
Malaysia STPM (best 3)	6
Malaysia UEC	32
Norway GPA	2.8
Pakistan HSSC	75
Sri Lanka A Levels (best 3)	6
Sweden GPA	12.5

View full entry requirements Hide full entry requirements

Brochure Enquire Compare 0 Compare Degrees Apply

Degree overview

Learn in custom-built on-campus workshops.
Work on real-life projects, gaining valuable practical experience.
Build working prototypes of your designs in our workshops and dedicated studios.
Benefit from our networks and relationships with the product and industrial design industry – locally, nationally and internationally.
Learn from teachers who are practicing professionals with strong links to industry.
Focus on the humanisation of technology.
Get the opportunity to complete some of your study internationally.
Be taught by world-class leaders in research – UniSA's research in product design is ranked world class¹.
Study at a university that developed the first Bachelor of Design degree in the world.
UniSA is an unstoppable university for unstoppable people. As one of the World’s Top Young Universities², we’ll ensure you get the experience your future profession demands so it’ll feel like you’re studying one minute and in a career the next.

¹Results in Design Practice and Management - 2018 Excellence in Research for Australia (ERA)
²UNSTOPPABLE® is a Kellogg Company trade mark used under licence. Ranked #43, 2024 THE Young University Rankings.

Snapshot

This practical degree will equip you with the skills needed to design and create products that people use every day, such as electronic devices, domestic appliances, homewares, medical devices, sports equipment, user experiences and interfaces, furniture, mobility solutions and more.

Product designers need to consider human factors, usability, aesthetics, manufacturing technologies, materials and environmental sustainability in their designs, and this comprehensive, practical degree will have you doing just that. During your studies, you will develop fundamental practical skills through design studio classes, model-making and prototyping.

You will learn in our dedicated studios and state-of-the-art workshops fitted with digital fabrication equipment such as laser cutters, CNC routers and 3D printers, and virtual reality systems. You can practice skills learned in real-world workplaces when you complete professional placements as part of your study. There is also the opportunity for you to complete some of your studies overseas.

What you'll learn

There is a lot of ground to cover in this degree, starting with a fundamental understanding of the elements and principles of design. Much of this study takes place in the purpose-built design studios located on-campus. You will study basic skills and concepts relating to areas such as sketching and visualisation techniques; design history and theory; human centred design; computer-aided design; and creativity. During your second year you will broaden your knowledge, covering topics such as:

ergonomics and human factors
human centred design principles
advanced 3D computer modelling and manufacturing
sustainable design concepts and methods
materials and processes
manufacturing and engineering principles

In your third year there will be a focus on design for usability, user experience, high volume manufacturing and sustainability, and you will be able to select a range of electives to tailor your study to your individual interests.

Degree structure

Course name	Area and cat no.	Units	Reference
FIRST YEAR
First Semester (Study Period 1, 2 or 3)
Product Design Studio 1 (Foundation)	GRAP 1031	9
Physical Prototyping Techniques for Product Design	GRAP 1021	4.5
Drawing for Product Design	GRAP 1022	4.5
Second Semester (Study Period 4, 5 or 6)
Product Design Studio 2 (Principles)	GRAP 1024	9
Computer Graphics and Imaging for Design	GRAP 1018	4.5
Introduction to Computer Modelling for Product Design	GRAP 1026	4.5
SECOND YEAR
First Semester (Study Period 1, 2 or 3)
Product Design Studio 3 (Human Factors)	GRAP 2032	9
Low Volume Manufacturing for Product Design	GRAP 1025	4.5
Advanced Computer Modelling for Product Design	GRAP 2029	4.5
Second Semester (Study Period 4, 5 or 6)
Product Design Studio 4 (Materials, Processes and Sustainability)	GRAP 2033	9
Human-Centred Design: Research and Analysis	GRAP 2031	4.5
Product Design: History, Culture and Context	GRAP 2039	4.5
THIRD YEAR
First Semester (Study Period 1, 2 or 3)
Product Design Studio 5 (Usability)	GRAP 3010	9
High Volume Manufacturing for Product Design	GRAP 2034	4.5
Transdisciplinary Projects	GRAP 3013	4.5
Second Semester (Study Period 4, 5 or 6)
Product Design Studio 6 (Capstone)	GRAP 3011	9
Elective		4.5	Note(s): 1,2
Elective		4.5	Note(s): 1,2

Rules & notes

Notes

1. Students who have a Grade Point Average of 4.5 or more and wish to independently pursue a topic of interest not available in the electives list may choose a research or project-based individual elective with the approval of the Program Director.

2. Electives may be studied in any study period and may be chosen from any discipline within the University. See undergraduate elective course list.

Study hours

For each course you study, you will need to allocate time for various classes such as lectures, tutorials, workshops, seminars and practicals. Plus you will need additional hours to study in your own time to complete assignments, readings and projects and contribute to online discussion forums (independent study). Typically there are 15 contact hours a week, with the expectation of 30 hours a week of self-directed study.

Assessment

Your studies will incorporate practical, professionally focused and research-based learning, so assessment types will vary. You can expect them to include:

projects involving building physical prototypes and models
essays and assignments
creation of apps and interfaces
technical drawing exercises
journals

Global opportunities

Enrich your studies and your life – make overseas study part of your qualification. You may have the option to undertake an exchange, short-term program or study tour overseas while you study. We have links with universities worldwide, as well as a range of travel grants available to make going overseas much more accessible.

You can choose short-term or semester-long study from a range of universities and countries depending on your area of study and cultural interests.

Take a look at the global opportunities available.

Why Bachelor of Design (Product Design)

This degree enables you to practice the skills needed for a successful product and industrial design career. Our dedicated design studios and workshops boast digital and analogue equipment enabling students to build their own prototypes, such as:

laser cutters
digital machining, including CNC routers and water jet cutters
3D printers
virtual reality systems
machines for hand fabrication

A large portion of your practical learning will take place in these areas, and Design Studio courses make up a large part of the degree’s curriculum. In these courses, you will design objects and products such as domestic appliances, musical instruments, mobility solutions and furniture. In addition to the on-campus practical experience, you will also benefit from industry placements and our strong industry links. There may also be the opportunity to participate in international and national study tours, competitions and exhibitions.

Real-world connections

Our teaching staff are highly trained industry professionals who bring with them years of experience. They have strong industry links and many hold professional positions with organisations including the Design Institute of Australia, Adelaide Design Network and others. For students this means links to industry and the opportunity to build important networks. There is the opportunity for you to further build on your industry network when you undertake work placements.

UniSA offers an extensive range of career-related events and workshops online, on campus and around Adelaide to develop your skills and increase your knowledge.

Career outcomes

Your career

Job prospects in this field are looking good, with very strong growth in employment expected nationally¹. You can increase your employment prospects when you continue your studies with a Master of Design, specialising in Industrial Design.

Careers to consider:

product designer: develop new designs in a broad range of industries, including consumer electronics, domestic products, medical products, transportation and app design
3D computer modeller: develop designs into 3D models and technical drawings using specialised software in a broad range of industries
User experience designer: responsible for turning applications into experiences that people enjoy using across a broad range of industries.
furniture designer: develop design concepts, experiment with different materials, liaise with clients and build sample models for either mass-produced furniture prototypes or one-off exclusive pieces
technical illustrator and animation: design and create visual representations for use in marketing content, technical publications and manuals

¹Australian Government, Job Outlook 2020.

Professional accreditation and recognition

Graduates of this program are eligible for Graduate Membership of the Design Institute of Australia. Graduates are eligible for Associate Membership of the Design Institute of Australia after two years of professional practice.

How to apply

How to apply for international students will give you helpful information about the application process at the University of South Australia. When you are ready, apply through our International Application System. If you would like to talk to someone near you about studying at the University of South Australia, we have agents all over the world who can assist you. Find an Education Agent in your country.

Alternative Pathways

Australian
There are other pathways you can follow to study this degree, including:

International
There are other pathways you can follow to study this degree, including:

SAIBT Diploma of Arts

Credit transfer

You could be eligible for credit for previous studies you have undertaken. Find out online.

Go to credit assessor

Life in Adelaide

Current international students talk about living in Adelaide and studying at UniSA.

Hear from our students

Scholarships

Every year, over 2,500 UniSA students are supported in their studies through scholarships and grants worth millions of dollars. Check out the scholarships below. One of them may be perfect for you. Visit our scholarships page for more.

More scholarships

Vice Chancellor's International Excellence Scholarship

Recipients can get a 50% reduction on tuition fees for up to four years of full-time study for selected degrees.

Learn more

International Merit Scholarship

Recipients can get a 15% reduction on tuition fees for the duration of their chosen degree.

Learn more

Your study experience and support

As a UniSA student, you will have unique access to work placement opportunities, overseas study tours and exchanges, networking events, internships, guest speakers and more.

Our campuses are equipped with state-of-the-art facilities including modern lecture theatres, libraries, workshops and laboratories, as well as spaces that simulate real work environments. These are all supported by the latest technologies and a 24/7 online learning platform. We have health services on campus, gymnasiums, technology zones and great student lounges. You will also gain access to a range of community clinics, which provide professional and cost effective services in areas of health, business, law and psychology. There are campus sport activities to keep you active, and if you are keen to explore the social side of university life, there are movies, cooking demonstrations, parties and lots more.

Adelaide also has a variety of accommodation options to suit different requirements and budgets. Options include dedicated student accommodation and private rentals. See our long-term accommodation pages, or explore our student accommodation by Scape on Bank Street in Adelaide’s lively cultural precinct, an ideal location for students. It is within easy reach of UniSA’s city and metropolitan campuses, Rundle Mall shopping, the Central Market, Chinatown, and the West End’s vibrant nightlife. It is also across the road from the Adelaide train station, and on bus and tram routes.

Student services

Our international student services provide you with all the support you need at university. We want you to succeed, and if you need help, we're here to assist. You can access a full range of support services, including:

career advice and mentoring
help with student visas and health cover
personal counselling
academic counselling
fees and finance help
common rooms
prayer rooms
security officers
accommodation services
as well as services offered through our student association, USASA.

We also offer study support from our Learning Advisers face-to-face or online. They are here to help you develop academically and professionally during your studies, and can offer help with the English language too. When you become a UniSA student, you can also contact Campus Central for help with anything related to your degree. They will help you with your enrolment, ID cards, fees, timetables and more.

24/7 digital environment

Our learnonline facilities include a personal learning environment with virtual classrooms, lecture recordings, emails, learning support, administration, library access and results. The environment is available 24 hours a day, seven days a week, so you can tailor your learning to your life. We are continually investing in innovative digital technologies for a high-quality student learning experience.

Your campus

We have six campuses in metropolitan and regional areas, each with modern facilities including lecture theatres, libraries and laboratories, as well as spaces that simulate real work environments.

Your study spaces

As a design student, you will have access to:

custom-built on-campus design studios created specifically for product design students
workshops with an extensive range of traditional machines and tools, as well as a digital workshop that includes 3D printers, laser cutters and CNC routers.

Your program director

Dan McLean is the Program Director of Design, Product Design at the University of South Australia. Dan has worked professionally on Industrial Design projects in fields including consumer electronics, automotive and food and beverage packaging. He has worked in Australia and internationally as a professional Industrial Designer and has extensive design teaching experience, specifically in Design Studio courses, Human Centred Design, Design Drawing and 3D Visualisation.

Dan’s areas of expertise include product styling, branding, human factors, human centred design and design for manufacture.

Mr Dan McLean

Program Director

Enquire

Mr Dan McLean

Program Director

Enquire

Ask UniSA

How do I apply?

There are a number of ways to apply to study UniSA's undergraduate and postgraduate coursework degrees.

You can access our online International Application System through our How to Apply page. The International Application System is an easy and secure online application and acceptance process. You will have visibility of your application through the secure online portal with the ability to download offer documents, submit your acceptance and make a payment.

Alternatively you can submit an application through one of the University's registered Education Agents.

If you are completing an Australian year 12 qualification in Australia or overseas, or the International Baccalaureate (IB) Diploma Programme in Australia, you must apply through SATAC http://www.satac.edu.au/.

If you are applying for the UniSA Study Abroad or Study Abroad Plus program, you can submit your application online here.

Postgraduate study by research
For information on applying to do postgraduate study by research, including Masters by Research, PhDs or Doctorates, please visit http://unisa.edu.au/resdegrees.
Is there a closing date for applications?

There is no closing date for submitting your application however the admissions process takes between one and three weeks from the date that we receive your application and all required supporting documentation.

If you are completing an Australian year 12 qualification in Australia or overseas, or the International Baccalaureate (IB) Diploma Programme in Australia, you must apply through SATAC. Key dates for applications can be found here.
What credit can I receive for previous studies?

You may be eligible to receive credit or advanced standing for your chosen UniSA degree based on your previous studies, if they are in a related area at an equivalent or higher level. Receiving credit will reduce the number of courses you undertake within the degree, and may also reduce the overall duration of your degree.

The amount of credit you may be eligible to receive is assessed on a case-by-case basis by the Admissions team.

The best way to determine your eligibility to receive credit or advanced standing is to apply using our International Application System which can be found on our How to Apply page. You will need to supply detailed syllabus documents with your application.
Can I speak to someone regarding my study options?

UniSA welcomes the opportunity to speak with you regarding your study options. Our staff are able to talk to you about degree information, career outcomes and pathways, entry requirements, applications, and student life, so that you are able to make the best study decision for your future.

Click here to book a 1:1 appointment with one of our enquiries team.

We also have many events throughout the year in Australia and overseas where you can speak with UniSA representatives about your area of interest. View our calendar of events in your home country by selecting the 'International' filter.

More FAQs

What others are saying

I participated in a trip to China to take part in a university workshop as well as two internships at a design consultancy and bicycle company. My involvement with industry has been incredible, giving me opportunities I wouldn’t have had any other way.

Liam Buggy

Bachelor of Design (Product Design)

Liam Buggy

Bachelor of Design (Product Design)

Hear from David Gordon about workshop here at The University of South Australia's City West campus. The workshop gives students the equipment and plenty of space to work through the entire development process from concept, development to production giving them hands on experience with the machinery and materials.