Bachelor of Engineering (Honours) (Electrical and Mechatronic)
Degree Level Undergraduate
Year 2025
You're viewing degree information for International students
You're considered an International student if you are:
- NOT an Australian or New Zealand citizen
- NOT an Australian Permanent Resident (including Permanent Humanitarian Visa holders)
Program Code
LHIF
Prerequisites
SACE Stage 2 Math Methods
More info
Assumed Knowledge
SACE Stage 2 Physics
More info
Fees
AUD$ 42,000 per annum (per 1.0 EFTSL) for students enrolled in 2025
Admissions
Student Profile
English Language Requirements
- IELTS total [6.0]
- IELTS reading [6.0]
- IELTS writing [6.0]
International Admission by Country
See full entry requirements
CRICOS Code
081811E
-
View full entry requirements Hide full entry requirements
Entry requirements
Admission criteria
The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.
Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.
Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:
Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND- Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
- Complete secondary qualifications equivalent to SACE, or
- Complete the International Baccalaureate Diploma with a minimum score of 24 points
Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.
OR
Higher education study- Complete or partly complete a recognised higher education program at a recognised higher education institution, or
- Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above, or
- Complete the Associate Degree in Engineering at the University of South Australia
OR
Vocational Education and Training (VET)- Complete an award from a registered training organisation at Certificate IV or above
OR
Work and life experience- Qualify for Special Entry, or
- Complete a 12-month UniSA Foundation Studies program or equivalent, or
- Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past
Essential requirements for admission
Prerequisites
SACE Stage 2 Math MethodsAssumed Knowledge
SACE Stage 2 PhysicsEnglish language entry requirements
In addition to meeting academic entry requirements, international students who speak English as a second or additional language must also meet the University's English language entry requirements. The minimum language requirements for this program are:English language testPlease access the following link for a comprehensive list of English language tests accepted by UniSA and other important information in relation to meeting the University’s language requirements: English Language Equivalence Table (PDF)- IELTS total [6.0]
- IELTS reading [6.0]
- IELTS writing [6.0]
Admission Requirements by Country
Bangladesh HSC 4 Canada High School (OSSD) 65 Eynesbury FSP 330 German Abitur 3.5 Kenya KCSE (average) B+ Malaysia STPM (best 3) 6 Malaysia UEC 30 Norway GPA 3 Pakistan HSSC 85 Sri Lanka A Levels (best 3) 7 Sweden GPA 13 UK Board GCE A Levels/HK Board 7 Vietnam 7.5 Australia 72 IB (best 6) 26 USA SAT (1600) 1110 India (best 4) State Board 75 India (best 4) Central Board 65 HKDSE 15 Nepal NEB 2.61
This program allows progression to fast-track Masters. Visit Fast-track to Masters in STEM for more information.
Degree overview
- Professionally accredited by Engineers Australia, (EA), graduates are eligible for membership with EA and comparable international institutions.
- Endorsed by the Naval Shipbuilding College (NSC) as part of the College Endorsement Process.
- Learn in specialist, purpose-built facilities and prepare for Industry 4.0 with cutting edge software platforms and collaborative digital environments.
- Discover our practice-based learning approach incorporating challenging and creative project work.
- Start now, decide later. Flexible entry pathways and common first-year across all Engineering Honours programs so you can change your specialisation based on your interests.
- Focus on the synergistic application of electrical, mechanical, robotics, control and software technologies to the development of electromechanical systems through a holistic, integrated design approach.
- Gain real work experience through the UniSA STEM Professional Practice Program.
- Go on an overseas study exchange and choose from over 25 countries and more than 60 universities worldwide.
- Access a new pathway option for students to complete the required mathematical prerequisite if required.
Snapshot
Position yourself at the forefront of technology where mechanical and electrical engineering and computer science combine.
The Bachelor of Engineering (Honours) (Electrical and Mechatronic) will see you explore the physics-based modelling and simulation of electromechanical systems. You will learn how to analyse, design and implement electromechanical systems using cutting-edge software platforms and collaborative digital environments.
Professionally accredited by Engineers Australia, this degree is strongly hands-on, with significant opportunities to apply engineering theory to real-world challenges. In your final year, you’ll complete a major honours research project as well as an industry-focused design project.
Through the UniSA STEM Professional Practice Program you’ll gain at least 450 hours of skills and competencies to ensure you are graduate career ready. You will have access to a range of engagement activities such as placements, internships, guest lectures, industry panels, site visits, events and networking opportunities. Hear more about the benefits of the UniSA Industry experience from graduates William, Franke and Teresa here.
Enjoy a common first-year across most Engineering degrees enabling you to switch between specialisations and receive credit for completed courses. This means if you change your mind about your Engineering specialisation after first-year, you can change programs and still complete your degree in 4 years full-time. Start now, decide later.
On-campus teaching for this program is based at the Mawson Lakes campus. Only 20 minutes from the city centre with easy parking. The Mawson Lakes campus is also accessible by bus and train with the Mawson Lakes train station only a short walk.
New Pathway options for Engineering
If you haven’t completed SACE Stage 2 Mathematical Methods and want to study engineering, consider our Bachelor of Engineering (Honours) (Flexible Entry). You’ll study first year courses, and catch up on the required prerequisite, before transferring into your preferred engineering specialisation with up to one year of credit.
What you'll learn
In your first year you will develop a strong, general foundation in engineering including computer programming, applied mathematics and physics. As you advance in your studies you will learn about:
- analog electronics
- digital electronics
- mechanics
- electromechanical system design
- computer programming
- computer networking
- embedded systems
- signal processing control
- industrial actuation and automation
- mobile robotics
- machine learning and vision, and
- systems engineering.
Our UniSA STEM Professional Practice Program allows you to apply the skills and knowledge you've acquired throughout your degree in real-world settings.
At least half of your honours year will involve a major project. Under the guidance of engineering academic staff, you will use the latest design tools to develop an innovative product for a client or to progress research in an associated area.
Study hours
For each course you study, you will need to allocate time for various classes such as lectures, tutorials, workshops, seminars and practicals. Plus you will need additional hours to study in your own time to complete assignments, readings and projects, as well as to contribute to online discussion forums (independent study). So as a general rule, if you are studying full-time you would need to allocate 12–26 hours of study when at university and 14–28 hours of independent study per week.
Assessment
Your studies at UniSA will incorporate both practical, professionally-focused and research-based learning, so assessment types will vary. You can expect them to include:
- reports, project documentation, case studies and presentations
- essays and other assignments
- examinations
- industry-relevant, research-based projects
- practical, individual and team-based projects
Global opportunities
Enrich your studies and your life – make overseas study part of your qualification. You may have the option to undertake an exchange, short-term program or study tour overseas while you study. We have links with universities worldwide, as well as a range of travel grants available to make going overseas much more accessible.
You can choose short-term or semester-long study from a range of universities and countries depending on your area of study and cultural interests.
Take a look at the global opportunities available.
Honours
This is a four-year, professional degree with honours. The honours component includes a minimum of one year of advanced studies in research and professional practice. You will receive First Class, Second Class or Third Class Honours, depending on your performance.
You will graduate with industry experience and connections, and a higher-level qualification than a bachelor degree. Your honours year is designed to prepare you for future leadership roles in electrical and electronic engineering.
Why Bachelor of Engineering (Honours) (Electrical and Mechatronic)
In your studies you will develop advanced practical skills and theoretical understanding of analog electronics, digital electronics, mechanics, electromechanical system design, computer programming, computer networking, embedded systems, signal processing, control, industrial actuation and automation, mobile robotics, machine learning and vision, project management and systems engineering.
You’ll work alongside other engineering students on a major industry project in your final year. You may also be eligible for a full semester industry internship.
During your studies you’ll have access to our purpose-built engineering spaces equipped with industry-standard software and technology, including the:
- power system laboratory
- digital electronics laboratory
- electronics innovation laboratory
- mechatronics and robotics laboratory, and
- factory of the future laboratory.
All of our Engineering Honours programs share a common first-year, so choosing this degree offers ultimate flexibility. Should you wish to pursue a different specialty after completing your first-year, you can switch to an alternative Engineering program and receive credit for the courses completed. Start now, decide later.
4+1 Pathway to Masters
Are you interested in gaining a postgraduate degree with just one extra year of study? You can package the Bachelor of Engineering (Honours) (Electrical and Mechatronic) with the Master of Engineering (Engineering Management) with our Fast-track to Masters programs. This unique offering allows you to develop advanced expertise and broaden your career opportunities. You will graduate in just five years, instead of the typical six.
Study Engineering at UniSA
Explore our purpose-built electrical and mechatronic engineering facilities at the UniSA Mawson Lakes campus.
Your career
To be a successful electrical and mechatronic engineer, you should be a good problem solver, show a passion for understanding science, mathematics and technologies and applying your knowledge to the betterment of the quality of lives.
Careers to consider:
- Mechatronics Engineer: select, commission, design and maintain electromechanical systems leveraging multidomain engineering expertise.
- Computer/Embedded System Engineer: design and implement embedded systems performing sensing, communications, signal processing and control for various applications, ranging from consumer appliances to Industrial Internet of Things equipment. You will deal with graphics processing units and field-programmable gate arrays for advanced applications.
- Control System Engineer: select, commission, design and maintain control systems for automated devices, systems (as small as electric toothbrushes or as big as rockets) or processes.
- Robotics Engineer: select, commission, design and maintain robotic systems to replace or mimic humans or animals for safety, efficiency or entertainment in various processes and applications.
- Power Systems Engineer: design, build, maintain and monitor systems that deal with the generation, transmission, distribution and use of electric power, and electrical apparatus connected to such systems.
- Systems Engineer: apply a robust approach to the design and management of complex systems over their life cycle, including the integration of a large number of products from multiple vendors.
Explore a range of engineering and construction careers here.
Professional accreditation and recognition
This program is professionally accredited by Engineers Australia and is designed to meet the requirements for graduate membership of Engineers Australia and comparable international institutions.
Industry facts
How to apply for international students will give you helpful information about the application process at the University of South Australia. When you are ready, apply through our International Application System. If you would like to talk to someone near you about studying at the University of South Australia, we have agents all over the world who can assist you. Find an Education Agent in your country.
Alternative Pathways
Australian
There are other pathways you can follow to study this degree, including:
- UniSA College Diploma in STEM (Engineering)
- SAIBT Diploma of Engineering
- Eynesbury Diploma of Engineering
International
There are other pathways you can follow to study this degree, including:
- SAIBT Diploma of Engineering
- Eynesbury Diploma of Engineering
Scholarships
Every year, over 2,500 UniSA students are supported in their studies through scholarships and grants worth millions of dollars. Check out the scholarships below. One of them may be perfect for you. Visit our scholarships page for more.
Vice Chancellor's International Excellence Scholarship
Recipients can get a 50% reduction on tuition fees for up to four years of full-time study for selected degrees.
International Merit Scholarship
Recipients can get a 15% reduction on tuition fees for the duration of their chosen degree.
Your study experience and support
As a UniSA student, you will have unique access to work placement opportunities, overseas study tours and exchanges, networking events, internships, guest speakers and more.
Our campuses are equipped with state-of-the-art facilities including modern lecture theatres, libraries, workshops and laboratories, as well as spaces that simulate real work environments. These are all supported by the latest technologies and a 24/7 online learning platform. We have health services on campus, gymnasiums, technology zones and great student lounges. You will also gain access to a range of community clinics, which provide professional and cost effective services in areas of health, business, law and psychology. There are campus sport activities to keep you active, and if you are keen to explore the social side of university life, there are movies, cooking demonstrations, parties and lots more.
Adelaide also has a variety of accommodation options to suit different requirements and budgets. Options include dedicated student accommodation and private rentals. See our long-term accommodation pages, or explore our student accommodation by Scape on Bank Street in Adelaide’s lively cultural precinct, an ideal location for students. It is within easy reach of UniSA’s city and metropolitan campuses, Rundle Mall shopping, the Central Market, Chinatown, and the West End’s vibrant nightlife. It is also across the road from the Adelaide train station, and on bus and tram routes.
Student services
Our international student services provide you with all the support you need at university. We want you to succeed, and if you need help, we're here to assist. You can access a full range of support services, including:
- career advice and mentoring
- help with student visas and health cover
- personal counselling
- academic counselling
- fees and finance help
- common rooms
- prayer rooms
- security officers
- accommodation services
- as well as services offered through our student association, USASA.
We also offer study support from our Learning Advisers face-to-face or online. They are here to help you develop academically and professionally during your studies, and can offer help with the English language too. When you become a UniSA student, you can also contact Campus Central for help with anything related to your degree. They will help you with your enrolment, ID cards, fees, timetables and more.
24/7 digital environment
Our learnonline facilities include a personal learning environment with virtual classrooms, lecture recordings, emails, learning support, administration, library access and results. The environment is available 24 hours a day, seven days a week, so you can tailor your learning to your life. We are continually investing in innovative digital technologies for a high-quality student learning experience.
Your study spaces
You will have access to the latest industry technology and tools in our engineering spaces:
- Experience One Studio: a unique first year engineering space with open studio, small group and learning spaces. There are also chill out areas.
- ENE Experience Studio: the studio for second and third year students.
- Experiential Learning Space: a collaborative, innovation space. Final year students, postgraduate and research students, leading researchers and industry partners work side-by-side, in a flexible, open and creative environment.
- Digital Electronics Laboratory and Electronics Innovation Laboratory: build circuits with analog and digital components, program field-programmable gate arrays, and develop embedded systems using the latest electronic laboratory equipment
- Power System Laboratory: get hands-on experience with electrical machines and power electronics using industry-recognised equipment
- Mechatronics and Robotics Laboratory: explore active suspension systems, mobile robotics, industrial control stations comprising programmable logic controllers
- Factory of the Future Laboratory: explore networked collaborative robots, machine vision, and Industrial Internet of Things in the Industry 4 Robotics & Machine Vision Laboratory and Advanced Design Studio
Your program director
Dr Habibullah is a Lecturer in Mechatronics Engineering at the UniSA STEM, Mawson Lakes Campus. Previously, he worked as a lecturer in Mechatronics Engineering with the School of Environment, Science and Engineering (SESE), Southern Cross University (SCU), Australia. Followed by an FNRS Scientific Collaborator with the BEAMS Department, Universite Libre de Bruxelles (ULB), Belgium, Research Associate, and Casual Academic positions at the University of New South Wales (UNSW), Canberra at the Australian Defence Force Academy.
Dr Habibullah received a BSc degree in Mechanical Engineering with First Class Honours 1st from the Rajshahi University of Engineering and Technology (RUET), Bangladesh. He has been awarded the University Gold Medal for his excellent performance during his undergraduate study. He has completed ME and PhD degrees in Mechatronics Engineering from the University of New South Wales (UNSW), Australia. He is a member of the Asian Control Association (ACA), the International Federation of Automatic Control (IFAC), and an Ex. member of the LIGO Scientific Collaboration (LSC).
His research interests are in the joint areas of control theory and application, mechatronics, bio-mechatronics, robotics, industrial automation, nanotechnology, low-frequency vibration isolation, and vibration control of mechanical structures.
Ask UniSA
-
How do I apply?
There are a number of ways to apply to study UniSA's undergraduate and postgraduate coursework degrees.
You can access our online International Application System through our How to Apply page. The International Application System is an easy and secure online application and acceptance process. You will have visibility of your application through the secure online portal with the ability to download offer documents, submit your acceptance and make a payment.
Alternatively you can submit an application through one of the University's registered Education Agents.
If you are completing an Australian year 12 qualification in Australia or overseas, or the International Baccalaureate (IB) Diploma Programme in Australia, you must apply through SATAC http://www.satac.edu.au/.
If you are applying for the UniSA Study Abroad or Study Abroad Plus program, you can submit your application online here.
Postgraduate study by research
For information on applying to do postgraduate study by research, including Masters by Research, PhDs or Doctorates, please visit http://unisa.edu.au/resdegrees. -
Is there a closing date for applications?
There is no closing date for submitting your application however the admissions process takes between one and three weeks from the date that we receive your application and all required supporting documentation.
If you are completing an Australian year 12 qualification in Australia or overseas, or the International Baccalaureate (IB) Diploma Programme in Australia, you must apply through SATAC. Key dates for applications can be found here.
-
What credit can I receive for previous studies?
You may be eligible to receive credit or advanced standing for your chosen UniSA degree based on your previous studies, if they are in a related area at an equivalent or higher level. Receiving credit will reduce the number of courses you undertake within the degree, and may also reduce the overall duration of your degree.
The amount of credit you may be eligible to receive is assessed on a case-by-case basis by the Admissions team.
The best way to determine your eligibility to receive credit or advanced standing is to apply using our International Application System which can be found on our How to Apply page. You will need to supply detailed syllabus documents with your application.
-
Can I speak to someone regarding my study options?
UniSA welcomes the opportunity to speak with you regarding your study options. Our staff are able to talk to you about degree information, career outcomes and pathways, entry requirements, applications, and student life, so that you are able to make the best study decision for your future.
Click here to book a 1:1 appointment with one of our enquiries team.
We also have many events throughout the year in Australia and overseas where you can speak with UniSA representatives about your area of interest. View our calendar of events in your home country by selecting the 'International' filter.
What others are saying
While studying I completed the Santos Vacation Program, where I worked in Brisbane for three months with a team of engineers looking at the maintenance tasks of newly built gas compressor stations. I was able to apply what I learnt through my UniSA studies into practice and it was a great experience.
Dylan Hoskin
Bachelor of Engineering (Honours) (Electrical and Mechatronic)
Engineering is so much more than maths and physics; think robots, drones and exposure to world-class technology. No two days are ever the same and the opportunities are ridiculous. The future of every economy is based on electricity and electronics, meaning that this degree will be sustainable in terms of employment for many years to come.
Franke Agenbag
Bachelor of Engineering (Honours) (Electrical and Electronic)
Hear from a UniSA graduate
Hear from Liam Mallamo, a UniSA electrical and electronic engineering graduate, about how his degree helped him get to where he is today.
