Bachelor of Engineering (Honours) (Electrical and Electronic), Bachelor of Business
Degree Level Undergraduate
Year 2022
You're viewing degree information for Australian students
You're considered an Australian student if you are any of the following:
- Australian or New Zealand Citizen
- Australian Permanent Resident (including Permanent Humanitarian Visa holders)
Entry Scores
2022 Guaranteed Entry
Year 12 (ATAR-based): 72.00
Year 12 (Grades-based): B,B,B
TAFE/RTO: DIP
View Guaranteed Entry Info
2021 Cut-Offs
TAFE/RTO: Cert IV
View full entry requirements
-
View full entry requirements Hide full entry requirements
Entry requirements
Admission criteria
The admission criteria have been grouped to assist you to easily find the information most relevant to your circumstances. However, you may fit into more than one and the university will consider applicants against each of the relevant criteria.
Certain conditions apply. For more information refer to Appendix 4 of the University's Selection and Entry policy.
Applicants are required to meet one of the following criteria with a competitive result, and demonstrate that they fulfil any prerequisite requirements and essential requirements for admission:
Recent secondary education
Meet any prerequisite requirements with a minimum grade of C- or equivalent
AND- Qualify for the South Australian Certificate of Education (SACE), and achieved a competitive Selection Rank (ATAR), or
- Complete secondary qualifications equivalent to SACE, or
- Complete the International Baccalaureate Diploma with a minimum score of 24 points
Applicants who have not achieved the Selection Rank required for automatic selection may be selected for any remaining places based on the grades of their year 12 subjects.
OR
Higher education study- Complete or partly complete a recognised higher education program at a recognised higher education institution, or
- Complete at least four Open Universities Australia (OUA) courses at undergraduate level or above, or
- Complete the Associate Degree in Engineering at the University of South Australia
OR
Vocational Education and Training (VET)- Complete an award from a registered training organisation at Certificate IV or above
OR
Work and life experience- Qualify for Special Entry, or
- Complete a UniSA Foundation Studies program or equivalent, or
- Hold completed secondary qualifications equivalent to SACE obtained more than 2 years in the past
Essential requirements for admission
Prerequisites
SACE Stage 2 Math MethodsAssumed Knowledge
SACE Stage 2 Physics
This program will have no further intakes from SP1, 2022. Refer to Bachelor of Engineering (Honours) (Electrical and Electronic).
If you are interested in enrolling in a combined degree, contact SAS-MawsonLakes@unisa.edu.au for more information.
Degree overview
- Graduate with two qualifications, in just five years of study.
- Study at a university ranked No.1 in SA for graduate careers in business and management1.
- Focus on the design and operation of devices, equipment, technology and systems with complementary knowledge in business.
- Develop competencies and gain real work experience through the UniSA STEM Professional Practice Program.
- Learn about the generation, transmission and distribution of electrical energy and study analog electronics, digital electronics, embedded systems, electrical machines, computer networking, signal processing, and control systems.
- Develop your skills at the No. 1 University in South Australia for student experience and teaching quality in engineering2.
- Access the newly furbished Power System Laboratory, Digital Electronics Laboratory, Electronics Innovation Laboratory, Mechatronics Laboratory and Factory of the Future Laboratory.
- Go on an overseas study exchange and choose from over 25 countries and more than 60 universities worldwide.
1ComparED (QILT) Graduate Outcomes Survey 2018-20 – Full-time Employment Indicator (Postgraduate). SA public universities.
22021 Good Universities Guide –Undergraduate and Postgraduate
Snapshot
Combine engineering skills and knowledge with broad-based business education in this double degree. Alongside your studies in electrical engineering, develop an understanding of core business concepts such as marketing, management, international business and entrepreneurship.
Electrical engineers focus on energy and information, designing and operating devices, equipment, technology, services and systems. With our state-of-the-art facilities, you will apply engineering theories to real-world problems. Enjoy the flexibility of tailoring your business studies to your interests by choosing from a wide range of business electives, including management, accounting and finance, economics, law, and marketing.
Graduate career-ready by completing the UniSA STEM Professional Practice Program and gain at least 450 hours of skills and competencies through a range of engagement activities such as placements, internships, guest lectures, industry panels, site visits, networking and events.
Our graduates will be prepared for a professional career in the electrical and electronic engineering discipline with a broad-based business background using an industry focused, project-based teaching and learning approach.
What you'll learn
In your first year you will develop a strong, general foundation in engineering. You’ll then move into your electrical engineering major and complete core courses in business that will give you a solid grasp of business fundamentals such as international business, economics and entrepreneurship.
At least half of the honours year involves a major project. Armed with new knowledge and skills, using the latest design tools, and mentored by engineering academic staff, our honours students develop innovative products to advance technology.
In your final year, you will be able to choose from a wide range of business electives.
Our UniSA STEM Professional Practice Program allows you to apply the skills and knowledge you've acquired throughout your degree in real-world settings.
You can gain an extra qualification and broaden your career prospects by completing a Diploma in Languages.
Study hours
For each course you study, you will need to allocate time for various classes such as lectures, tutorials, workshops, seminars and practicals. Plus you will need additional hours to study in your own time to complete assignments, readings and projects, as well as to contribute to online discussion forums (independent study). So as a general rule, if you are studying full-time you would need to allocate 12–26 hours of study when at university and 14–28 hours of independent study per week.
Assessment
Your studies at UniSA will incorporate both practical, professionally-focused and research-based learning, so assessment types will vary. You can expect them to include:
- reports, project documentation, case studies and presentations
- essays and assignments
- examinations
- industry-relevant, research-based projects
- practical, team-based projects
- participation in the workplace and in class
Global opportunities
International exchanges and intensive study-tours open doors to new possibilities and experiences. Our engineering and business programs have strong connections with prestigious universities in Europe, Asia, and the Americas. Travelling and studying with leading academic staff and your peers is a wonderful opportunity to develop first-hand knowledge of the international business environment. You’ll find the experience invaluable for your personal and professional development, giving you a global perspective. Take advantage of our international partners and participate in internship and placement opportunities in global engineering firms.
UniSA has links with universities worldwide. You can choose short-term or semester-long study from a range of universities and countries depending on your area of study and cultural interests. Take a look at the global opportunities available.
Once you are a current student, you will be able to explore various study tours and exchanges and take advantage of Student Mobility Grants to make going on an overseas exchange or study tour achievable.
Honours
This is a five-year, professional degree with honours. The honours component includes a minimum of one year of advanced studies in research and professional practice. You will receive First Class, Second Class or Third Class Honours, depending on your performance.
You will graduate with industry experience and connections, and a higher-level qualification than a bachelor degree. Honours is designed to prepare you for future leadership roles in a range of engineering teams and project management of electrical and electronic engineering. When you’ve completed your honours why not consider a Master of Engineering (Electrical Power) or a Master of Engineering (Telecommunications).
Why Bachelor of Engineering (Honours) (Electrical and Electronic), Bachelor of Business
Industry has indicated a strong demand for skilled engineering graduates with solid business acumen.
With studies divided across two disciplines, you will have the flexibility to pursue transdisciplinary specialisations and gain a broad range of business knowledge, graduating with the key business skills to advance in their engineering careers. The strong business foundation of this program enables graduates to be well-prepared to work in diverse, interdisciplinary teams in order to solve complex problems in the global business environment.
Real-world connections
UniSA collaborates with over 2,500 companies worldwide to ensure our degrees remain relevant and connected to industry. As part of all engineering degrees UniSA students participate in our UniSA STEM Professional Practice Program. The UniSA STEM Professional Practice Program gives you the opportunity during your studies to gain hands on experience and create industry connections. In-industry work placements and internships enhance the employability skills of our graduates. Many of our graduates have been employed through work placements or internships.
UniSA is number one in South Australia for quality education1 and we’re one of Australia's leading universities for Engineering and Business research.2 Our leading researchers will be your teachers and everything you learn will be supported by our research excellence. We also host regular University-wide employee master classes and employment expos, and alumni events in Australia and overseas.
1 ComparED (QILT) Student Experience Survey 2019-20(Undergraduate and Postgraduate). SA public universities.
2 UniSA’s Engineering and Business research rated well above world-class – 2018 Excellence in Research for Australia (ERA)
Online study
Part, or all, of this degree can be studied online. With interactive online course materials and a 24/7 learning environment you can organise your study to suit your lifestyle. You can:
- study online, including accessing videos and course resources
- participate in an interactive online learning environment
- submit your assignments and get feedback online
- use discussion forums for team work and communication
Please note that for some degrees, some on-campus attendance (such as to attend seminars, workshops or examinations) and/or placements may apply. Any requirements like this are detailed on individual course pages.
Study at UniSA
Hear from Liam a UniSA electrical and electronic engineering graduate.
Your career
Graduate from this multi-disciplinary degree and start your career in electrical and electronic engineering, supported by the foundational business skills recommended for early career progression.
Careers to consider include:
- Electrical engineer: create solutions ranging from small component designs to large-scale systems by studying customer requirements; work on all stages of design for electrical services, from early research and development through to detailed design, installation and final commissioning
- Electronics engineer: use non-linear and active electrical components (such as semiconductor devices, especially transistors, diodes and integrated circuits) to design electronic circuits, devices, VLSI devices and their systems
- Embedded system engineer: design and implement embedded systems to perform sensing, communications, signal processing, control for various applications, ranging from consumer appliances to Industrial Internet of Things equipment; deal with graphics processing units and field-programmable gate arrays for advanced applications
- Power system engineer: design, build, maintain, and monitor systems that deal with the generation, transmission, distribution and utilisation of electric power, and the electrical apparatus connected to such systems
- Telecommunications engineer: design, commission, maintain, and monitor the installation of telecommunications equipment and facilities, such as complex electronic switching systems, and other plain old telephone service facilities, optical fibre cabling, IP networks, and microwave transmission systems
- Control system engineer: select, commission, design, and maintain control systems for automating industry processes
- Systems engineer: apply a robust approach to the design and management of complex systems over their life cycles, including the integration of a large number of products from multiple vendors
- Business development engineer: develop and maintain excellent client relationships; work with new and existing clients to create new business and identify new markets; propose business ventures, providing project details, writing business proposals, and meeting business revenue targets
- Engineering operations manager: supervise and lead teams of engineers, scientists and technicians who work on projects; oversee production and quality control; direct operations, testing and maintenance; plan and schedule, consult with clients, and manage budgetary responsibilities
- Quality assurance manager: work with management and staff to establish procedures and quality standards and monitor these against agreed targets; write management and technical reports; determine training needs; and promote change and improvement in performance and quality
- Engineering consultant: provide managing consulting services to help engineering organisations improve performance and efficiency; analyse businesses and create solutions to help meet goals
- Entrepreneur: use initiative, commercial acumen and broad ranging business skills to develop or transform a product or service for yourself or an organisation
Explore a range of engineering and construction careers here.
Industry facts
Applying to study with us:
- go to the top of this page and make note of the SATAC code, then click Apply
- you will be redirected through to the SATAC website to continue your application
Deferment
This degree is available for deferment. This option is made available by responding to your offer during the application process via the SATAC website. Applicants who receive an offer into a midyear degree are eligible to defer for six months.
Scholarships
Every year, over 2,500 UniSA students are supported in their studies through scholarships and grants worth millions of dollars. Check out the scholarships below. One of them may be perfect for you. Visit our scholarships page for more.
UniSA Excellence Scholarships
$5,000 scholarship for South Australian students with an ATAR of 99 who enrol to study a UniSA undergraduate degree.
UniSA Outstanding Achievement Scholarship
Up to $10,000 per annum (full time) for South Australian students who obtain an ATAR of 99.95 or IB equivalent and enrol to study at UniSA.
Study on Demand with Australia's University of Enterprise
UniSA Online – 100% online degrees designed specifically for online learning.
Your study experience and support
Our campuses are home to fantastic facilities including modern lecture theatres, libraries, workshops and laboratories, as well as spaces that simulate real work environments. But you’ll also discover that your journey at UniSA is about social experiences, healthy living and getting involved. You’ll find student sports and fitness facilities, community clinics, tech zones and chill-out spaces. There are campus sport activities to keep you active, and if you are keen to explore the social side of university life, there are movies, cooking demonstrations, parties and loads more.
Adelaide also has a variety of accommodation options to suit different requirements and budgets should you need, from dedicated student accommodation to private rentals. See our long-term accommodation pages or explore our student accommodation by urbanest on Bank Street in Adelaide’s lively cultural precinct, an ideal perfect location for students. It is within easy reach of UniSA’s city and metropolitan campuses, Rundle Mall shopping, the Central Market, Chinatown, and the West End’s vibrant nightlife. It is also across the road from the Adelaide train station, and on bus and tram routes.
Student services
Our student services provide you with all the support you need at university. We want you to succeed, and if you need help, we're here to assist. You can access a full range of support services, including:
- academic counselling
- personal counselling
- social support services, including family support and nearby childcare
- common rooms
- prayer rooms
- security officers
- career services and mentoring
- Wirringka Student Services, offering Aboriginal and Torres Strait Islander students a supportive place to study
- as well as services offered through our student association, USASA.
When you become a UniSA student, you can also contact Campus Central for help with anything related to your degree. They will help you with your enrolment, ID cards, fees, timetables and more.
24/7 digital environment
Our learnonline facilities include a personal learning environment with virtual classrooms, lecture recordings, emails, learning support, administration, library access and results. The environment is available 24 hours a day, seven days a week, so you can tailor your learning to your life. We are continually investing in innovative digital technologies for a high-quality student learning experience.
Study across our Mawson Lakes and City West campuses and broaden your skills in state-of-the-art facilities. You’ll learn in our industry-standard specialist spaces to apply engineering theory to real-world challenges, becoming skilled in electrical generation systems; renewable energy sources; electric and autonomous vehicles; and robotics and consumer products. While completing the business component of this program, you can also take advantage of the facilities and learning spaces at City West Campus. Choose quiet study with 24/7 library access or opt for the vibrant atmosphere of the student lounge or an on-campus cafe. Unwind with a swim at Pridham Hall or participate in a range of the sport and fitness activities available.
Your study spaces
You will have access to the latest industry technology and tools in our engineering and business spaces:
- Experience One Studio: the first-year engineering space is unique, with open studio, small group and learning spaces. There are also chill out areas.
- Engineering Experience Studio: the studio for second and third year students
- Experiential Learning Space: a collaborative, innovation space. Final year students, postgraduate and research students, leading researchers and industry partners work side-by-side, in a flexible, open and creative environment
- Digital Electronics Labs: build circuits with analog and digital components, program field-programmable gate arrays, and develop embedded systems using the latest electronic lab equipment
- Power System Lab: get hands-on experience with electrical machines and power electronics using industry-recognised equipment
- Mechatronics Lab: explore active suspension systems, mobile robotics, machine tool control, industrial control stations, comprising programmable logic controllers and supervisory control and data acquisition software
- Industry 4.0 Robotics & Machine Vision space: explore networked collaborative robots, machine vision, and Industrial Internet of Things
- Business student learning space: Access our dedicated business student support service (Business Student Hub), unique concierge, walk-up PCs and corporate-style lounge.
- City West learning spaces: Study alongside directors and CEOs in the Yungondi atrium, purpose-built for students, staff and executive education. Catch up with classmates in the student lounge or recharge in your own study nook at one of our on-campus eateries and cafes
Your program director
Dr Habibullah is a Lecturer in Mechatronics Engineering at the UniSA STEM, Mawson Lakes Campus. Previously, he worked as a lecturer in Mechatronics Engineering with the School of Environment, Science and Engineering (SESE), Southern Cross University (SCU), Australia. Followed by an FNRS Scientific Collaborator with the BEAMS Department, Universite Libre de Bruxelles (ULB), Belgium, Research Associate, and Casual Academic positions at the University of New South Wales (UNSW), Canberra at the Australian Defence Force Academy.
Dr Habibullah received a BSc degree in Mechanical Engineering with First Class Honours 1st from the Rajshahi University of Engineering and Technology (RUET), Bangladesh. He has been awarded the University Gold Medal for his excellent performance during his undergraduate study. He has completed ME and PhD degrees in Mechatronics Engineering from the University of New South Wales (UNSW), Australia. He is a member of the Asian Control Association (ACA), the International Federation of Automatic Control (IFAC), and an Ex. member of the LIGO Scientific Collaboration (LSC).
His research interests are in the joint areas of control theory and application, mechatronics, bio-mechatronics, robotics, industrial automation, nanotechnology, low-frequency vibration isolation, and vibration control of mechanical structures.
-
How do I apply?
There are a number of ways to apply to study UniSA's undergraduate and postgraduate coursework degrees.
Applications for admission into the University of South Australia’s undergraduate and most postgraduate degrees are made via the South Australian Tertiary Admissions Centre (SATAC). Visit satac.edu.au and follow the links.
For the MBA degrees please apply through the UniSA MBA Application Portal. Applications for a small number of degrees are submitted direct to UniSA through our Apply Online portal. It will be noted on the degree page if you need to apply via Apply Online.
Postgraduate study by research
For information on applying to do postgraduate study by research, including Masters by Research, PhDs or Doctorates, please visit unisa.edu.au/resdegrees. -
Is there a closing date for applications?
Undergraduate
Yes. The deadline to apply to study a degree at UniSA for semester one (commencing late February) and be given equal consideration is in early December. While you may be able to apply after this date, you are not guaranteed to be considered equally with other applicants and your application may not be assessed in time for the main round of offers (mid January). Some degrees will not make any offers after the main offer round. Please click here find all of the key dates for applications here.Postgraduate
Most postgraduate degrees do not have a closing date for applications. However, there are exceptions, so it is best to check – either on the SATAC website, Apply Online or the degree homepage. Postgraduate offers are normally ‘rolling’, meaning they may be sent out at any time up until the program starts. This also means that applications may close at any time without warning, if the quota is filled earlier. For this reason, postgraduate applications should be submitted without delay. For more information, please contact our Future Student Enquiries team on (08) 8302 2376 or via the online enquiry form. -
What credit can I receive for previous studies?
Credit transfer or advanced standing
You may be eligible to receive a credit transfer or advanced standing for your chosen UniSA degree based on your previous studies, if they are in a related area at an equivalent or higher level. Receiving a credit transfer will reduce the number of courses you undertake within the degree, and may also reduce the overall duration of your degree.
Recognised prior learning
If you have related industry experience, you may also be eligible to receive recognised prior learning for this experience. Receiving recognised prior learning will normally reduce the number of courses you undertake within the degree, and can reduce the duration of the degree.
How do I get credit?
Credit transfer and recognition of prior learning is assessed on a case-by-case basis by the Program Director who will discuss your prior learning and experience with you to ascertain what credit you may be eligible for.
Many of our credit transfer arrangements are listed on our online Credit Assessor.
-
Can I speak to someone regarding my study options?
UniSA welcomes the opportunity to speak with you regarding your study options. Our staff are able to talk to you about degree information, career outcomes and pathways, entry requirements, applications, and student life, so that you are able to make the best study decision for your future.
Click here to book a 1:1 appointment with one of our enquiries team.
If you are interested in studying an MBA please contact admissions@unisa.edu.au and our Future Student Enquiries team will contact you regarding your enquiry.
Alternatively, you can complete a MyCareerMatch career profile. MyCareerMatch is an online career profiling tool that you can use free-of-charge through UniSA. MyCareerMatch specialises in career profiles and provides you with a personalised career report outlining information about your personality style and a list of career options, which are complementary to your natural strengths and talents.
We have many events throughout the year where you can speak with a lecturer or tutor about your degrees of interest. You can find out what is happening at UniSA by visiting our events page or by signing up to our mailing list, so you're the first to know about careers events, information sessions, degree requirements, scholarships and more!
There are also many career counsellors external to the University that you can discuss your career options with. If you are unsure where to start your search, you can contact the Government's Work Ready team (formally Skills for All). Visit skills.sa.gov.au or call 1800 506 266.
You may also find Job Outlook a helpful resource in your decision-making.
-
Where can I get further information?
It can be difficult to decide what degree you would like to do and where. You might find information from government organisations will help to weigh up your degree and provider options.
Find a course or a provider
TEQSA is a regulatory body for higher education providers. Use the TEQSA national register of higher education providers to search for a course or a provider. Compare courses and providers for undergraduates and postgraduates using the Quality Indicators for Learning and Teaching (QILT) online comparison tool.
More information on university admission
Visit the SATAC website to find out important news, events and information on applying to university in South Australia. Visit Study with Us to find out everything you need to know about studying at UniSA, admissions and the application process.
Questions about your application
If you have any questions or concerns regarding your application you should contact the Future Students Enquiries team in the first instance.
